TCP & TPMS buttons
I decided to fit buttons for TCS and TPMS set. Both of them to the center console.
I bought those buttons from Aliexpress.
The connectors and the wiring
The schematic:
Testing the wiring and the buttons.
The illumination looking good.
Next step is the fitting.
I had to remove the RCD, the center console and the
A mess...
On the top there are the 2 connectors from Hazard warning lights and Heated rear window.
According to the schematic, the illumination wires should are No3 and No6 and should be connected to No3 and No6 of the Heated rear window connector.
And the final result :
I haven't connect the other cables yet, i have to drive 2 of them to the engine compartment and another one to SC30.
So long those buttons are for decoration purposes only. I have to do the rest of the wiring and some coding with VCDS.