From Stock Golf 7.5 to….

A section of the forum for members to show off their non-polo vehicles.
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Hello and merry Christmas.

This is the adaptation of the Ergoactive Seats to my golf…..
Attachments
51DFED02-C4E2-4500-8CC1-3FA336B9920F.jpeg
51DFED02-C4E2-4500-8CC1-3FA336B9920F.jpeg (729.95 KiB) Viewed 4584 times
C9B55F93-EC12-42AC-865D-C7F45BD50555.jpeg
C9B55F93-EC12-42AC-865D-C7F45BD50555.jpeg (921.19 KiB) Viewed 4584 times
E3A7834F-1331-4270-B4D4-5DE19132F210.jpeg
E3A7834F-1331-4270-B4D4-5DE19132F210.jpeg (888.16 KiB) Viewed 4584 times
3DCD6DCE-8FC3-469F-B181-D7105429F133.jpeg
3DCD6DCE-8FC3-469F-B181-D7105429F133.jpeg (4.39 MiB) Viewed 4584 times
D58FF247-6E3A-47D9-9C44-6BFE535EC980.jpeg
D58FF247-6E3A-47D9-9C44-6BFE535EC980.jpeg (248.59 KiB) Viewed 4584 times
4E81C07C-6FAB-4D69-9379-D6A1E8BFAA5A.jpeg
4E81C07C-6FAB-4D69-9379-D6A1E8BFAA5A.jpeg (3.3 MiB) Viewed 4584 times
D6031626-AAC3-4C62-8F77-041FB7C9EF85.jpeg
D6031626-AAC3-4C62-8F77-041FB7C9EF85.jpeg (2.71 MiB) Viewed 4584 times
8CF78302-0519-4833-9779-3CBDAFCA941B.jpeg
8CF78302-0519-4833-9779-3CBDAFCA941B.jpeg (3.05 MiB) Viewed 4584 times
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

No coding needed. Only use a positive and negative wire. The seats came from Poland without airbags. Only change the airbags from my seats to the Ergoactive Seats. Sliding in the airbag module needs almost total removal of the seats fabric cover.
Attachments
05CCE6AC-81BF-4AE8-AA04-04FADAD955EE.jpeg
05CCE6AC-81BF-4AE8-AA04-04FADAD955EE.jpeg (697.76 KiB) Viewed 4582 times
278EF5DD-300B-42E4-8A22-F4E4EA23F98B.jpeg
278EF5DD-300B-42E4-8A22-F4E4EA23F98B.jpeg (121.06 KiB) Viewed 4582 times
4C7187DB-07F8-424A-ADAB-3062625E1475.jpeg
4C7187DB-07F8-424A-ADAB-3062625E1475.jpeg (475.73 KiB) Viewed 4582 times
91628AC6-BA12-4683-9E89-C8E1587634ED.jpeg
91628AC6-BA12-4683-9E89-C8E1587634ED.jpeg (230.35 KiB) Viewed 4582 times
684147D4-DB94-4631-879A-7EECCBC1EBD8.jpeg
684147D4-DB94-4631-879A-7EECCBC1EBD8.jpeg (300.12 KiB) Viewed 4582 times
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Hi all. Merry Christmas

Regarding the installation of the Soundaktor I have noticed a drop in the battery level of the vehicle. I have also noticed that a noise is activated inside the hood of the engine that could be what other users identify when making this mod as a gasoline pump.

Has anyone had problems with this adaptation?
Attachments
F24EE52C-D083-410A-A6AC-A5E7DD202362.jpeg
F24EE52C-D083-410A-A6AC-A5E7DD202362.jpeg (783.21 KiB) Viewed 4546 times
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7787
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: From Stock Golf 7.5 to….

Post by ciclo »

🎉Merry Christmas🎉

Someone reported about vibrations (weird noise).
If you flexed the car sheet metal too much to be able to insert the two screws, try returning the sheet metal to its original condition, as straight as possible.

I didn't have these problems, but I checked anyway after reading it.
I have no problem with the battery after installing the soundaktor.


---

Please Carolco, try to use links instead of capturing images from other places without permission of the owner, it is not the correct way to do things, unless you really want to damage the place where the images come from ...
By using images from other places your reports are confusing.

Try to use only and exclusively images that are your property, from your car.
Thank you!!

A hug!🤗
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Good morning Fernando.

My apologies if I use other people's images. In some steps of the adaptation, I did not take graphic proofs and when I saw them from other users I like to complete the sequence of the steps with those photos. but with no intention of offending its owners. I reiterate my sincere apologies if they have been upset.

With regard to the Soundaktor, the problem of vibrations was detected and solved by putting adhesive felt to the screw and washers (1) holding the loudspeaker to the structure, both above and below. thus eliminate the vibration. The fastening to the metal plate of the motor (2) was done by placing the screws backwards and I managed to tighten it with a washer. It holds up well without bending the sheet, which I can't.

The problem that I mention is that the gasoline pump, from what was said in other forums, is activated sequentially every so often, approximately 10 seconds. What I perceive is a fine sound, and there has been a drastic drop in the capacity of the battery. Yesterday I measured and it was 38%. The sound is tested with car stoped and with the car closed and locked….

As a power outlet, use a F28 socket, with a 10 amp fuse, and the connection to the motor bus about 3 cm from the connector near the bonnet lever.
Attachments
2A0B67A0-9C0F-4833-BD22-3771A61F96C0.jpeg
2A0B67A0-9C0F-4833-BD22-3771A61F96C0.jpeg (1.59 MiB) Viewed 4506 times
Last edited by Carolco on Sun Dec 26, 2021 10:12 am, edited 1 time in total.
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

This is where I splice the two cables coming from the Soundaktor. Also comment that no failure is recorded in any related unit.
Attachments
CB494F53-D107-45AB-AB2F-2444FDC78C3F.jpeg
CB494F53-D107-45AB-AB2F-2444FDC78C3F.jpeg (1.6 MiB) Viewed 4502 times
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Good Morning.

Here is the configuration for footwell lights for golf 7.5. All the modifications are done in the adaptations of unit 9 (BCM).

The hardware for installation was get positive from body BCM C pin 72, and negative to the chasis in the fuse box zone for example.

The codification can be modified, but this is the stock version.
Attachments
B8A13829-761C-4254-B089-07E981885575.png
B8A13829-761C-4254-B089-07E981885575.png (2.22 MiB) Viewed 4425 times
89DE868D-12EB-4AE5-968C-0D6BAAEC1ABF.jpeg
89DE868D-12EB-4AE5-968C-0D6BAAEC1ABF.jpeg (212.54 KiB) Viewed 4427 times
B51AF57E-E7FB-4C6D-B1EC-793CB9AB9173.jpeg
B51AF57E-E7FB-4C6D-B1EC-793CB9AB9173.jpeg (311.5 KiB) Viewed 4427 times
D2689AA9-74A3-4142-A5A2-36190AA06DF2.jpeg
D2689AA9-74A3-4142-A5A2-36190AA06DF2.jpeg (184.12 KiB) Viewed 4427 times
0C00B950-85F9-4AFD-8CFC-27FE85562CCE.jpeg
0C00B950-85F9-4AFD-8CFC-27FE85562CCE.jpeg (180.18 KiB) Viewed 4427 times
8902961B-220D-4411-A2FE-06CCD3AF3F3C.jpeg
8902961B-220D-4411-A2FE-06CCD3AF3F3C.jpeg (170.57 KiB) Viewed 4427 times
F289BA73-0A7C-4C35-A860-8866133A2CF2.jpeg
F289BA73-0A7C-4C35-A860-8866133A2CF2.jpeg (151.62 KiB) Viewed 4427 times
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Another interesting modification. The warning lights in the front doors. The PIN number 5 is the negative, and can be used for other ambients lights….
Attachments
A802191D-532F-4CBC-AA72-9A965ABF3719.jpeg
A802191D-532F-4CBC-AA72-9A965ABF3719.jpeg (254.15 KiB) Viewed 4352 times
156B2C79-E1D4-434E-9412-4A2AF43CE199.jpeg
156B2C79-E1D4-434E-9412-4A2AF43CE199.jpeg (420.98 KiB) Viewed 4352 times
FCDC47F8-DEA3-4720-A7C9-3017C43970C0.jpeg
FCDC47F8-DEA3-4720-A7C9-3017C43970C0.jpeg (192.23 KiB) Viewed 4352 times
22F1D584-E69A-4A09-8FE6-EDF2AB28D3F3.jpeg
22F1D584-E69A-4A09-8FE6-EDF2AB28D3F3.jpeg (322.89 KiB) Viewed 4352 times
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

My sincere thanks to Slavik for his help in solving the problem with the Soundaktor.

I made a mistake when assigning the positive fuse F28 which is Terminal 30, instead of the one corresponding to this installation which is F34.

The reason was not to touch other fuse snatches that it had on.

It has been better to clean up the installation and leave everything in better order. The fuse according to VW should be 7.5 amps. This is terminal 15.
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

hello everyone.

Installing rear door lights. Positive signed with blue arrow, and negative signed with yellow arrow.

But i have a little stumble when the door is closed. In photo can see a little bit of light is on.....

Can anyone solved ? May be with a 1k ohm resistor ? It is the better solution ?
Attachments
3.jpg
3.jpg (755.63 KiB) Viewed 4167 times
2.jpg
2.jpg (599.91 KiB) Viewed 4167 times
1.jpg
1.jpg (1.21 MiB) Viewed 4167 times
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7787
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: From Stock Golf 7.5 to….

Post by ciclo »

Low quality lamp, poor electrical installation, or the polarity in the lamp connector is not correct.
You do not provide enough information... images of your work, or type of lamp used.

When the parts are not 100% OEM, the polarity of the lamp, as well as the circuit design of the lamp should be checked before installing the lamp. There are many copies of parts that have the numbering for wires assignment different from the original.

If the lamp is LED "OEM", it already has the appropriate resistance in the circuit... never install additional resistors in current vehicles electrical circuits, install the appropriate parts.

Diagrams:
viewtopic.php?p=583390#p583390
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Thanks Fernando.

The problem was the lamp. It was a old lamp buyed in eBay two years ago….. And stay with a little bright when the door is closed. And still with the car closed. I don’t like it.

Now I have used one led of red colour, and now bright so nice. The led are the same I used for the footwell lights. It have 6 points of red light. And it shut down perfect when the door is closed. Tomorrow I will take some pictures of this installation. Only in one side, because I don’t have to much time for my hobby.

And I change the plate lights, with white led canbus. It works so great.

Tomorrow the photos…..
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

The photos….
Attachments
1A40C5C2-FF74-456B-8604-49BB047284BD.jpeg
1A40C5C2-FF74-456B-8604-49BB047284BD.jpeg (2.01 MiB) Viewed 3990 times
C3A76700-6A42-4693-B348-D2AF2DFFBE06.jpeg
C3A76700-6A42-4693-B348-D2AF2DFFBE06.jpeg (1.96 MiB) Viewed 3990 times
DEA23D9D-912A-4575-A895-46903B8F2AB4.jpeg
DEA23D9D-912A-4575-A895-46903B8F2AB4.jpeg (762.53 KiB) Viewed 3990 times
giannis20vt
Silver Member
Posts: 260
Joined: Sat May 15, 2021 6:23 am
Drives: Polo 6c MY2016 1.0 75Hp
Location: Greece

Re: From Stock Golf 7.5 to….

Post by giannis20vt »

Looking great, well done.
Carolco
New
Posts: 46
Joined: Sat Sep 04, 2021 8:20 pm
Drives: Golf 1.4 TSI 7.5
Location: Canary Islands

Re: From Stock Golf 7.5 to….

Post by Carolco »

Thanks so much.

This are the leds I have used for the footwell lights and the rear door exit lights.

I have used a six focal point red led. and I have kept the cover, which is the original one that comes on the rear door. The cover is red as well.
Attachments
0B96CAD9-818A-4881-B277-C628E79FCA7B.jpeg
0B96CAD9-818A-4881-B277-C628E79FCA7B.jpeg (236.35 KiB) Viewed 3978 times
Post Reply