UK-POLOS.NET - THE VW Polo Forum

By surfing on internet and on ahw-shop I found that VW offer a lowering spring kit for the Polo 6C
with different part number to match different axial load.

Mine is a:
-870 kg at the front
and
-800 kg at the rear

So the ideal kit for me should be the 6R0071677.
Link: https://shop.ahw-shop.de/original-vw-ti ... 677?c=4173

It can lower the car of 25-30mm and it's seems to be a good compromise between confort and look.
With his current and stock springs, Polo 6C looks like a 4x4, even more at the rear. The gap between the wheel and arch is massive.

For information, I have 16" Portago wheel.

But I have few questions:

How is the ride quality with those spring on the stock absorber ? Not too bouncy ?
Also, do you think my local dealer could accept to install them on my car ?

If you have some pictures to illustrate, I will be happy to check them

Have a great day !

Isn't that the same as eibach prokit E10-85-024-01-22? If so, it is a great set that combines comfort with lowering. A big plus is that you can use standard shock absorbers for them, although I recommend bilstein b6 35-168560 for them. You can put them on, you will surely be very pleased . Currently, I only have the back on the Eibach prokit -30. In a few months there will be a complete eibach + bilstein b6 sport.

Lee_Liu_Te wrote: Mon Nov 01, 2021 2:10 pm Isn't that the same as eibach prokit E10-85-024-01-22? If so, it is a great set that combines comfort with lowering. A big plus is that you can use standard shock absorbers for them, although I recommend bilstein b6 35-168560 for them. You can put them on, you will surely be very pleased . Currently, I only have the back on the Eibach prokit -30. In a few months there will be a complete eibach + bilstein b6 sport.

It's not impossible because the springs of VW are manufactured by...Eibach So maybye they are the same or VW with Eibach designed special springs for the 6C, I don't know.
In every case I will keep my stock shock absorbers. Even after 84000 km they still fine.

I thought to put some kit from bilstein but...too expensive in comparison of the car. It's still a 66kw car...not a sport's one

I have to replace the shock absorbers so I chose bilstein b6. I only have 55kW, but I think the stiffer suspension will not be in - only in +