Does anyone have the correct torque setting for the front hub / driveshaft nuts on a 2007 9n3 1.4 16v bud engined polo ?
I know it’s not very tight maybe 70nm from memory?
Many thanks
Front hub nut torque setting
-
- Silver Member
- Posts: 408
- Joined: Mon Sep 03, 2018 9:43 pm
- Drives: 2015 6C GTI DSG Oryx white 3 door.
- Location: South west uk
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Front hub nut torque setting
12-point nut (self-locking)
q Specified torque for 13” running gear = 50 Nm
Apply locking fluid -D 185 400 A2- beforehand to the splines and the external thread of the drive shaft
q Specified torque for 14” - 15” running gear = 50 Nm and turn 45° further
q Always renew after removing.
q Specified torque for 13” running gear = 50 Nm
Apply locking fluid -D 185 400 A2- beforehand to the splines and the external thread of the drive shaft
q Specified torque for 14” - 15” running gear = 50 Nm and turn 45° further
q Always renew after removing.
-
- Silver Member
- Posts: 408
- Joined: Mon Sep 03, 2018 9:43 pm
- Drives: 2015 6C GTI DSG Oryx white 3 door.
- Location: South west uk
Re: Front hub nut torque setting
Thank you very much for the information, replacement hubs fitted with new nuts