Need some help sourcing front bumper

Chat about your 6R/6C model Polos here!
Post Reply
Fat
New
Posts: 7
Joined: Tue Dec 06, 2022 6:50 pm
Drives: 2017 1.2 TSI Match Edition
Location: Scotland

Need some help sourcing front bumper

Post by Fat »

Hey guys

Crashed my motor at the start of year lmao

Been trying to source a front bumper (6C0 807 221 with parking sensor cut-outs) they seem impossible to find. Not really wanting to cut the holes myself inaccuracies and probable damage to the bumper etc, was wondering if anyone could point me in the right direction. Cause for some reason sourcing parts for the facelift models is f*****g pain in the ass.

Also if anyone could help me with finding these
Radiator closing panels
Drivers side

6C0 121 284D

Radiator closing panel
Passenger side

6C0 121 283E

Would be greatly appreciated really been missing my motor sitting in my mate's yard
User avatar
Franciswat
Silver Member
Posts: 267
Joined: Thu Sep 21, 2017 9:39 am
Drives: 6R 1.6 Bifuel
Location: Italy

Re: Need some help sourcing front bumper

Post by Franciswat »

There's a proper tool to easily cut PDC holes without damaging even the paint. Let me know if you need more details.
User avatar
ag69
Silver Member
Posts: 429
Joined: Fri May 26, 2017 10:39 am
Drives: 1.2TSi 77Kw 7DSG
Location: Earth

Re: Need some help sourcing front bumper

Post by ag69 »

Fat
New
Posts: 7
Joined: Tue Dec 06, 2022 6:50 pm
Drives: 2017 1.2 TSI Match Edition
Location: Scotland

Re: Need some help sourcing front bumper

Post by Fat »

Thanks a lot guys, really appreciate it
User avatar
Franciswat
Silver Member
Posts: 267
Joined: Thu Sep 21, 2017 9:39 am
Drives: 6R 1.6 Bifuel
Location: Italy

Re: Need some help sourcing front bumper

Post by Franciswat »

ag69 wrote: Fri Jan 27, 2023 12:34 pm This is tool to drill PDC holes
https://www.cars-equipment.com/en/shop/ ... tting-out/
Yea, that's what I was talking about. :D
amer6R
Platinum Member
Posts: 1104
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: budget build

Re: Need some help sourcing front bumper

Post by amer6R »

I think on the inside there should be marked positions for the sensors.

But if you have old bumper stick masking tape on it, mark the holes, then transfer the tape on the new bumper and you will have locations where to drill.
Its easy to find center od circle
Post Reply