Hey guys
Crashed my motor at the start of year lmao
Been trying to source a front bumper (6C0 807 221 with parking sensor cut-outs) they seem impossible to find. Not really wanting to cut the holes myself inaccuracies and probable damage to the bumper etc, was wondering if anyone could point me in the right direction. Cause for some reason sourcing parts for the facelift models is f*****g pain in the ass.
Also if anyone could help me with finding these
Radiator closing panels
Drivers side
6C0 121 284D
Radiator closing panel
Passenger side
6C0 121 283E
Would be greatly appreciated really been missing my motor sitting in my mate's yard
Need some help sourcing front bumper
- Franciswat
- Silver Member
- Posts: 267
- Joined: Thu Sep 21, 2017 9:39 am
- Drives: 6R 1.6 Bifuel
- Location: Italy
Re: Need some help sourcing front bumper
There's a proper tool to easily cut PDC holes without damaging even the paint. Let me know if you need more details.
- ag69
- Silver Member
- Posts: 430
- Joined: Fri May 26, 2017 10:39 am
- Drives: 1.2TSi 77Kw 7DSG
- Location: Earth
Re: Need some help sourcing front bumper
This is tool to drill PDC holes
https://www.cars-equipment.com/en/shop/ ... tting-out/
https://www.cars-equipment.com/en/shop/ ... tting-out/
-
- New
- Posts: 7
- Joined: Tue Dec 06, 2022 6:50 pm
- Drives: 2017 1.2 TSI Match Edition
- Location: Scotland
Re: Need some help sourcing front bumper
Thanks a lot guys, really appreciate it
- Franciswat
- Silver Member
- Posts: 267
- Joined: Thu Sep 21, 2017 9:39 am
- Drives: 6R 1.6 Bifuel
- Location: Italy
Re: Need some help sourcing front bumper
Yea, that's what I was talking about.ag69 wrote: ↑Fri Jan 27, 2023 12:34 pm This is tool to drill PDC holes
https://www.cars-equipment.com/en/shop/ ... tting-out/
-
- Platinum Member
- Posts: 1117
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Need some help sourcing front bumper
I think on the inside there should be marked positions for the sensors.
But if you have old bumper stick masking tape on it, mark the holes, then transfer the tape on the new bumper and you will have locations where to drill.
Its easy to find center od circle
But if you have old bumper stick masking tape on it, mark the holes, then transfer the tape on the new bumper and you will have locations where to drill.
Its easy to find center od circle