UK-POLOS.NET - THE VW Polo Forum

Hey guys

Crashed my motor at the start of year lmao

Been trying to source a front bumper (6C0 807 221 with parking sensor cut-outs) they seem impossible to find. Not really wanting to cut the holes myself inaccuracies and probable damage to the bumper etc, was wondering if anyone could point me in the right direction. Cause for some reason sourcing parts for the facelift models is f*****g pain in the ass.

Also if anyone could help me with finding these
Radiator closing panels
Drivers side

6C0 121 284D

Radiator closing panel
Passenger side

6C0 121 283E

Would be greatly appreciated really been missing my motor sitting in my mate's yard

There's a proper tool to easily cut PDC holes without damaging even the paint. Let me know if you need more details.

This is tool to drill PDC holes
https://www.cars-equipment.com/en/shop/ ... tting-out/

Thanks a lot guys, really appreciate it

ag69 wrote: Fri Jan 27, 2023 12:34 pm This is tool to drill PDC holes
https://www.cars-equipment.com/en/shop/ ... tting-out/

Yea, that's what I was talking about.

I think on the inside there should be marked positions for the sensors.

But if you have old bumper stick masking tape on it, mark the holes, then transfer the tape on the new bumper and you will have locations where to drill.
Its easy to find center od circle