What gaskets and seals do I need when removing the intake manifold
Posted: Mon Jul 17, 2023 9:03 pm
Hi there,
To replace the crank position/engine speed sensor (G28) on my 2003 1.4l Polo (BBY engine) I’ve been told I will need to remove the intake manifold.
I’m struggling to find info on what seals or gaskets I will need to replace after taking off the intake manifold. I believe i’ll have to separate the throttle body housing from the intake manifold to get enough access to take off the rest, so does that mean i’ll need a new gasket/seal for that?
Sorry for the very basic question, I just don’t want to get half way through disassembly to find I’m stuck without the right bits!
Cheers,
James
To replace the crank position/engine speed sensor (G28) on my 2003 1.4l Polo (BBY engine) I’ve been told I will need to remove the intake manifold.
I’m struggling to find info on what seals or gaskets I will need to replace after taking off the intake manifold. I believe i’ll have to separate the throttle body housing from the intake manifold to get enough access to take off the rest, so does that mean i’ll need a new gasket/seal for that?
Sorry for the very basic question, I just don’t want to get half way through disassembly to find I’m stuck without the right bits!
Cheers,
James