Page 1 of 1
bulb in heater controls
Posted: Tue Oct 05, 2004 10:40 pm
by metz
hiya guys n gals..does anyone know how i change the bulb in the heater controls as mine aint working.
Posted: Wed Oct 06, 2004 5:41 pm
by LogIK
Yeah.
You have to go to VW and get the bulb, as GSF or EP don't stock it. It's only a few quid, but still, I guess that's expensive for a damn bulb!
Once you have the new bulb, you need to remove the front pannel, then the ash tray unit. Once these are off, you need to remove the clear pannel to disconnect the old bulb and replace with the new one.
I can't remember the exact procedure, but the Haynes explains most of it.
Posted: Wed Oct 06, 2004 9:13 pm
by SpikeyG40
or u could get a bulb from a scrappy and pray it works like i did! (it worked by the way)
right little sod to get out!
Posted: Wed Oct 06, 2004 11:08 pm
by metz
its quite tricky to get out if u dont know what ur doing..the bulb is kinda wierd too.
ordered one from the stealers £4:03 picking it up 2mozz..all that time ive had the car i never noticed the heater was in the dark.
Posted: Thu Oct 07, 2004 9:14 pm
by Tahrey1043
who cares anyway..... do it by touch
thats a jokily sarcastic comment by the way and should not be taken as anything serious
Posted: Fri Oct 08, 2004 8:45 pm
by LogIK
Same with me. I never noticed until it was very cold one day and I couldn't see whether the blower was fully on hot and then it clicked
Must be a common one to blow.