Page 1 of 1

1.2 TSi (2016) Lumpy running, cut out, won't restart

Posted: Sat Nov 21, 2026 12:18 am
by TsiMike
1.2 TSI EA211 (65 plate Polo)

Hey all,
Thanks for having me here, and I'm sorry to make the first post a question asking for any advice you may have. I think that's how most of us start out but it still feels awfully cheeky! Whilst I personally have an overweight Polo (golf) my sisters polo has a potentially serious problem. I promise to stick around, and to update this should anyone search for such an issue in the future.
I wondered if any of you guys may have any input on this at all please? My sisters car began running lumpy today, and then it cut out. The car would not restart. The timing belt has been changed (July) if that makes any difference to these error codes that are now stored :
P001100 A Camshaft Position (Bank1): Timing over-advanced or System Performance.
P030000 - Random misfire detected
P030100 - Cylinder 1 Misfire Detected
P030200 - Cylinder 2 Misfire Detected
P030300 - Cylinder 3 Misfire Detected
P030400 - Cylinder 4 Misfire Detected
My concern is that the timing has potentially jumped and as such I don't want to try and start it if the timing is physically out. Could this be caused by a failure of the solenoid that controls oil for the vvt or could it be another sensor? I'm guessing cam and crank both have sensors which I'll try and have a look at tomorrow but I'm very limited with what I can actually do.
Thanks for any advice you have, she's really saddened at this as she's owned the car for 11 years and it's never gone wrong before this point!