Page 1 of 1
fox evo 2 alloys
Posted: Mon Oct 18, 2004 11:27 am
by lord_sharpy
would these fit on my gt? im already running 15" raceline alloys, the picture shows a 5 stud wheel but ive been offered a set with 4 stud, with toyo proxes on. there on my mates saxo vtr at the mo, is the pcd and offset suitable?
cheers
james
http://www.ronniecowan.co.uk/FOX%202%20EVO%20SILVER.jpg
Posted: Mon Oct 18, 2004 11:32 am
by metz
just had a quick look on the net and found this >
CITROEN
Model P.C.D. Offset C/Bore
AX, Saxo 3 x 098 9...15 58.0
Saxo (some models) 4 x 108 12...18 65.0
If thats correct then the wheels won't fit im afraid
alloys
Posted: Mon Oct 18, 2004 6:16 pm
by lord_sharpy
my wheels at the minute are running spacers behind them, is this just for looks, or for a reason, does anyone else run 15" wheels on 195/45 rubber and do they use spacers?
Posted: Mon Oct 18, 2004 7:15 pm
by metz
It may be because of the offset of your wheels,
mk3 offset is 38
wheel spacers
Posted: Mon Oct 18, 2004 8:32 pm
by lord_sharpy
they are raceline rls. they only catch when the suspension goes right up, i found out thought that the front right didnt have a spacer on and the other 3 wheels had them on. i was thinking about taking the front 2 spacers out.
Posted: Mon Oct 18, 2004 11:07 pm
by Gareth_GT_Hatch
If you can get them with a 4x100pcd then they will fit on. ET35 isnt miles out, people have much further out offsets than that.
Posted: Tue Oct 19, 2004 9:44 pm
by Tahrey1043
well considering that just one step upwards in tyre section size means an extra 5mm each side, 3mm isnt going to be a big whoop unless you're already pushing the envelope.