uprated engine mounts...?
Posted: Thu Jan 20, 2005 7:26 pm
Are these available for the mk3 & if so... where from & how much?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
uprated engine mounts...?
Page 1 of 1
Posted: Thu Jan 20, 2005 10:35 pm
Yes, you can get them in germany. I think the cup cars had them too, but are like hens teeth. I saw some solid alloy ones on german ebay, would shake the car to bits I reckon.
Posted: Thu Jan 20, 2005 11:36 pm
Argh! Just imagining a long motorway drive with solid alloy engine mounts.... nargh!
Posted: Fri Jan 21, 2005 6:06 am
Yeh, the cup car mounts are harsh. I tried just the rear gearbox one once and took it back off before the car even hit the road, it drummed through the bodywork that much! 
Posted: Fri Jan 21, 2005 9:28 am
just get new VAG ones.
Posted: Fri Jan 21, 2005 6:06 pm
Anyone know of any places in Germany (websites preferably) where the uprated cup car mounts cab be obtained from?
If not... might have to be the standard VW jobbies then (when the time arrises)
At a guess... how would this sound as a reasonable option then...
both front mounts uprated and a standard rear gearbox mount from VW?
If not... might have to be the standard VW jobbies then (when the time arrises)
At a guess... how would this sound as a reasonable option then...
both front mounts uprated and a standard rear gearbox mount from VW?
Posted: Fri Jan 21, 2005 6:49 pm
The cup car ones are a very hard rubber i think and if they shake the car a lot, then I hate to think what the alloy ones do
Get standard new ones
Get standard new ones
Posted: Sat Jan 22, 2005 6:40 pm
standard new one would be best, coz they gonna be new rubber, they will be harder than the ones u got now, !! 