UK-POLOS.NET - THE VW Polo Forum

@ciclo

You were right..
When you mentioned that the problem could be in the coding, i gave it a try..
I had my old coding, which i copy paste..

Well the error is gone and everything works smooth again!



Verstuurd vanaf mijn Lenovo K50-t5 met Tapatalk

iichel wrote:did you already disable light diagnostics for backup lights?
http://www.gerritspeek.nl/vag-com_dtc-00901.html

byte 11 bit 6

Yes sir, i did

.

Ok.
driver door trim = driver door panel ...is what I meant... sorry :oops:
Yes i took the door panel a few times..

You must of disconnected or damaged the small blinking red led on the door to indicate it is locked (like an alarm led), it has nothing to do you the blinkers(indicators).
Remove ...

ciclo wrote:Ok.
driver door trim = driver door panel ...is what I meant... sorry

Yes i took the door panel a few times..

Hi Rud031, I'm glad you're here again. :wink:

Indicator lamp K133 (red led driver door)
[img]http://i35.servimg.com/u/f35/18/94/39/39/6r1-0511.png[/img]

Hmm...Short to ground - intermittent ... frequency 3 .
Can you post a BCM scan (faults included)? It might just be a coding ...

@ciclo

Hi,
I have an issue with my car..
The warning lamp at the dashboard keeps burning..

After a scan it says this( photo):
http://uploads.tapatalk-cdn.com/20160822/c096459a40c5484db37259afd5cff994.jpg

*The error for back up lights have been solved.


I have replaced 2 lamps, but the error ...

I would definitely not doubt on your experience..

HI Rud031, I deeply regret that you have not interpreted my last message with more sense of humor.
My sincere apologies.

Honestly, with all the information I provided, you do not have time to search google what you're asking?...
Well maybe i interpreted it wrong..


And i did search on google ...

.
Maybe i will retrofit the wiring according to the diagram, but thats not a big deal
... if so, you should not keep asking ...
@ciclo
I send the guy you told ne about an email.. but ive got no response..
Do you have the ebay link for the MQS and MCP por favor..?
No necessary ask to please (por ...

You dont need to be sarcastic ciclo
(Panda..?)

@ciclo
I send the guy you told ne about an email.. but ive got no response..

Do you have the ebay link for the MQS and MCP por favor..?

This wiring was made by me. I suspect a small short circuit between terminal 15 and terminal 30, causing the engine to stay on after iginition off.
This short was only activated in auto mode and gone if switch was moved from auto to other setting. So no blame on ciclo indeed.
I will not put the ...

:arrow: Look here (3. Kontakteübersicht)

Contact terminals
1 :arrow: MCP 2.8 - Multiple Contact Point - 2,8mm http://www.a4-freunde.com/attachment.php?attachmentid=289149&d=1415951353
37 :arrow: MQS - Micro Quadlok System - 0,63mm http://www.a4-freunde.com/attachment.php?attachmentid=288923&d ...

Thank you ciclo..
1 question:
Can you tell me where i can buy the junior power timer for nr 37 and for nr 1?
And what diameters are the one for nr 37 and for nr 1?
Because if i put the pun in nr37 into the BCM, it takes some strength to pin it.. i think it needs to go more smoother and every time it ...