UK-POLOS.NET - THE VW Polo Forum

Hi

Nope, I ended doing a bunch of other upgrades, including a newer/bigger bcm which did the trick.

Is it only when its -5 or lower? or just worst at those temps

Due to the autoscan, who made and installed your wiring for automatic lights?
Check it.


Of course! it was my error.. It's fixed now, and everything works perfectly!!! :mrgreen: :mrgreen: :mrgreen:

Thank you for all of your help! It's much appreciated !

Two quick follow-up questions:

Is it ...

Did it myself according to your diagram, will double check later today

Connectors came early 8)

61 :!: is now enabled -- But start/stop would be nice to have permanently off

Interior lights working :!:

Its more or less only high beam and cornering lights I would like to have fixed :mrgreen:

Latest autoscan with a new error code for high beam



VIN ...

Ahh thought so, well 55 will be a spring project

Interior wires are done like
viewtopic.php?p=580205#p580205

61 will be enable in the weekend, ran out of connectors for the lin wire

That helped out 1 error, still one remaining though.

So still not able to control dimming or LWR.
No high beam :roll: (only highway flash)

I am maybe too used to autolights from MQB, but shouldnt it be able to turn on the low beam, when its dark enough?

And another thing :?:
Shouldnt there be ...

Check that a wire black/green reaches T73b/11. Take a picture of the fuse box.
Check/Set BCM adaptation channels 53 and 54 to 0 in case the values are 1. That is, from 1 to 0 in both cases.
In case you have installed LED lamps in some of the lights, tell us where you installed them and the exact ...

Okay, will do that, what should I do about the lighting issues?

61? :lol:

What 61 ? :oops:



3CB02FB848210000213807B17CEB1FD85A80672F600530C1200000020000


That help a lot, still a few issues:

Lightswitch:
0 = LED on ---- ok :D
Auto = LED on, no low beam -- not ok :cry:
Parking light = dimmed led --- ok 8)
Low beam = Led dimmed, low beam on --- ok 8 ...

This is a diagram that I made a long time ago and that you must follow for your Bixenon headlights wires installation.


🔎https://drive.google.com/file/d/0B2nv91Y7YYCbQklyc19UMVlaeUE/view?usp=sharing

NoTe: :)
Pay special attention to the wires for the Parking / side lights, your 6R BlueMotion ...

Hello!

Here is an update!
Its working somewhat now..

Lightswitch:
0 = LED on
Auto = LED on, no low beam
Parking light = all lights off
Low beam = Led off, low beam on

On all settings, I can flash high beam, but not turn it on constantly. No cornering lights either
Low beam level regulation, and ...

By the way, when i did the wire job for the autolight, I noticed that, the wire for the original t17/3 wasn't there on my car..

I can see, that if, it had been there it's connected to A9 and then to fuse SB9 / SB39.

Maybe this only applies for cars that original has H4 headlamps or lower bcm to ...

Here is my new autoscan

https://www.dropbox.com/s/drez747w182sk ... i.txt?dl=0

Hi Ciclo

All wires is connected now, just need a bit of help with the coding, by the way, went for autolight with ch/lh, followed your guide :D

Tried to plug in the xenon, main beam works but thats it, no led drl og shutter...


by the way tried to send autoscan but im getting: forbidden ...