UK-POLOS.NET - THE VW Polo Forum

Hello Folks,
Where can I buy BCM MAX (for Vento, polo sedan POLO 6R) from in Germany?
I am from India and luckily one of my friend happens to be in Germany as of now so he can buy it for me
A little help would be much appriciated
Thanks

I see You can order these from your local VW dealer. You'll need details from ETKA to get the plug part numbers and associated pins however Ciclo on here may be able to assist you I tried to approach the VW dealer here in India but no luck, will try to contact Ciclo. Thanks for help :) Hi Karthik, ...

Hello folks, I have a VW Vento 1.6 mpi, I am facing a oil leak issue near the oil filter and timing cover seal, is this a common issue for 1.6 mpi engines? My Polo has a different 1.6 engine (EA211), so I am not sure if it is a common problem on your engine. But either way, it is better to change t...

Remove cluster from car. Open the cluster by removing torx screws. Turn needles in anti clock rotation while pulling up. Remove the tacho plate, on the PCB there is an EEprom chip. You will need SOIC clamp ( if you dont want to de solder the chip) If you are going to remove it with an iron USE FLUX...

Oil leak on VW Vento 1.6 mpi near the oil filter and timing cover, please help.

Hello folks,
I have a VW Vento 1.6 mpi, I am facing a oil leak issue near the oil filter and timing cover seal, is this a common issue for 1.6 mpi engines?

amer6R wrote: ↑Tue Sep 29, 2020 7:22 am Not possible, you will have to access the Eeprom and change change stored value.

Thank you for the reply, does accessing the Eeprom needs some kind of special tool?

iichel wrote: ↑Mon Sep 28, 2020 7:53 am Ok then it is going to be difficult :p

I will try to arrange for a VCDS cable from a friend btw thanks for the quick reply
below is the link of my post describing the error codes with my cable
viewtopic.php?f=56&t=70519&p=575973#p575973

iichel wrote: ↑Sun Sep 27, 2020 5:32 pm If you have VCDS, have a look at the adaptation channels of your instrument cluster. Look for 'staging' or 'indicator celebration'

I have a clone VCDS cable (17.8 but that does not work, is there any way to repair the cable? I have posted the details of the error I get with the VCDS cable

Hello Folks, I have a clone 17.8, after running the VCDS 17.7 software on laptop it says port status ok, interface found, not connected to the car (Attached the screenshot below) some help would be much appreciated :D Once the cable did work after running the test (it said status ready K1:OK K2:OK C...

Hi folks I have a VW Vento (polo sedan) 2010, I have attached the image of the cluster and wanted to know if it is possible to activate the needle sweep on that cluster? also does the BCM has to do anything with the activation of needle sweep feature? My BCM part number is 6RU937086B. Please throw s...

alexperkins wrote: ↑Tue Sep 22, 2020 2:14 pm I see

You can order these from your local VW dealer. You'll need details from ETKA to get the plug part numbers and associated pins however

Ciclo on here may be able to assist you

I tried to approach the VW dealer here in India but no luck, will try to contact Ciclo.
Thanks for help

Conversion pins? The plugs are the same. Literally just change the headlight unit Thanks I currently have H4 single barrel headlights with just one connector to the headlight, one for the parking light one for the turn indicator. I have purchased the dual barrel headlights but the connectors it has...

Can anyone please help me to source the new conversion pins from single barrel to dual barrel headlights?
Thanks

Just joined the forum, feels great to read the great threads, looking forward to do some easy DIYs on my Polo Sedan