UK-POLOS.NET - THE VW Polo Forum

Hi Danish, you mean the exterior pics?

Hi, any suggestion on getting the ECU wire through firewall?
Till now I did the tests by running the cable over the door.

Current Wire Run: https://drive.google.com/file/d/1NZvt5vDcQd2UyGqx_N0IYU-2xxLzxlkt/view?usp=share_link

I tried accessing the rubber grommet below the water cowl. But the ...

Hi, CC is working perfectly. Thanks a lot Iichel and Patil for your kindly replies. Thanks a lot for this forum for all the valuable information from masters.

Hi, That 4 Pins are there. I checked it while buying and only 6RU937087F don't support CC, but 6R0937087F has those pins. I have completed the wiring now. The CC buttons are working I checked using VCDS, And also I have changed the ECU byte 5 bit 5 and it accepted the coding. I will reassemble ...

Hi, It was manual from factory. After upgrading the BCM I added the Remote Key (Center Locking works perfectly with Remote Key, Boot Lock also).

Is there any way to confirm whether BCM gets the vehicle speed value. I tried enabling auto door lock when vehicle speed is above 15 Km/Hr but it didn't work.

Yes it has accepted the code.

Thanks guys for sharing your thoughts, I will proceed with the installation and will surely share my findings.

In general does cruise control in polo 6r depends on abs sensor values? Any idea?

If by any chance had anyone's cruise control functions worked perfectly after an abs sensor warning?

Yes I'm 100% Sure.
Here you go https://drive.google.com/file/d/1GfQJ3h ... 0wGbS/view
Thanks again

Hi,
Thanks for replying. The polo which I own is a comfortline Variant from 2012. And it doesn't have abs nor airbags. After 2015 only all the polo variants sold in India had Airbags and Abs. Before that only Highline and some Variants had Airbags and abs.

Hi everyone,
I am from India and I own a Polo 1.2TDI CFWA without ABS, And recently I have bought all the necessary parts required for cruise control retrofit (BCM, Stalk, Wiring) and I was collecting all the necessary Information required for a successful install and I came across a reply where it ...