UK-POLOS.NET - THE VW Polo Forum

Hi friends, Please could someone help? It’s not such a big request 😁 If you have polo 6n2, when you check oil or water level have a quick look where this hose is connected to.. that’s it very simple 😃 I know there is a tiny hose down the throttle, should it be connected to there? Thanks a lot in adv...

Now I need to find out to where this tiny air vacuum hose should be connected to? (marked in black round on the attached photo).
The big hose is connected to the break servo, this we know.
thanks for any help from you friends,
best regards,
Eli

Hello Juul my friend, I just wanted to update you and all the other users for the right solution I had with that vacuum pipe.. I discovered the right hole where the fuel regulator vacuum pipe should be connected too. It’s at the side of the engine just below the fuel regulator! (so now I have anothe...

Thanks Juul
Have a great day my friend!
Eli

Hi Juul, How are you? Hope you’re fine. I have been searching again and again and find that this hole on the inlet manifold is connected to other place, But I noticed that there is a little air connector on the air valve that leads air to the Vacuum servo that was not connected to nothing.. and it h...

Hi dear Juul,

Of course it helps!!
Thanks a lot my friend for your effort!
Best regards,
Eli

Thanks dear Juul for your reply! Regarding this tiny pipe which connected to the fuel regulator, still didn’t succeed to find where the hell its connected to.. even in vag parts catalog there is no information. So I have 2 options left, to find a similar model of polo and trace the pipe line or to v...

Hi dear Juul, Thank you very much for helping me again! I am much appreciate your detailed reply! Regarding icarsoft, what is their lowest model they have, That can do the work. If I had a garage of course I whould prefer to buy the most expensive tool. 😊 According your answer about that little hose...

Hi friends, I hope someone could help me pls. When I turn my polo 6n2. 1.4. 16v 2001 AHW on and its on idle it starts to vibrate and shake a little bit and then the rpm goes up and down above 10. I know it could be vacuum leaks, EGR system malfunctions, malfunctioning oxygen sensors, dirty fuel inje...

Dear Juul,
Thank you very much for your reply!
Yes! I found that the problem was a broken wire between the door and the chassis! I sold it and now everything works fine.
Thanks a lot for your kind help!

Hi dear members, I own polo 6n2 year 2001 16v AHW 1390 cc. The electric window driver side is not working. In this model there is only 2 electric windows in the front. When I Press the driver window side switch nothing happen. When I press the switch that control the passenger side from the driver p...