UK-POLOS.NET - THE VW Polo Forum

sorry to bump an old post but has anyone found a solution to this?
thanks again
tom

where abouts do you live in the uk i cld post you mine to borrow and try to figure it out?? to save you wasting your ££ if you cant manage it i have tried everything..... elsawin diagrams and all

still havnt managed to do this yet.... there must be someone else out there who is struggling as well if anyone has done it or has any ideas could they please share? thanks in advance x

thanks mate

cant intergrate the picture properly but these are the whitle clips that need to go on the black clips circled in red above?
thanks
tom

http://img3.freeimagehosting.net/uploads/af392bcb28.jpg


OK FOR ANYONE wanting to bodge wire up the KE60w the wires circled in red twice are the ones to use which is the interior lock switch

Right and for me to get the door on properly i need to hoook some white clips over the balck clips ...

i have taken mine off with brute force and have elsewin diagrams but they still wont go on properly hmmmm!!

any updates to this?

i second this how is it done ?? pictures would be awesome thanks guys

right ok, i will post some pictures of the door card later this week or maybe the weekend and give an exact wiring diagram of this also. But basically the central locking switch on the drivers side i dismantled and bought another from ebay as the original one was used in the installation soldered ...

sorry for the late repling is any one still interested how i wired up this system!??? I still have not managed to get the door card on properly! It is sitting about 3-5mm away from the actual door i could not get the clips to click back on!! Shall i take some pictures would be really nice if someone ...

well so far i have bodged it onto the interior lock / unlock switch on the drivers side door it works ok but does not deadlock i think?? Does this matter what is a deadlock also??

The basic issue i have is where to place the KE60w box and which wires are correct?? Can i just use any for example blue/white wire in the car or loom to attatch to the box or does it have to be one from a specific area in the car?
many thanks

Hi there, I recently purchased a rightclick system to convert my central locking to remote. On the install guide it says it all takes place in the driver side door but i beg to differ after reading the DIY guide on fitting the same kit to a mk5 in the DIY guides. Here are some pictures of the ...

i am working on it dont you worry!! Elsawin is prooving to be very useful tool ??? Does anyone know the origins of this software did someone steal it or something??