55 BHP 1.2 Polo Engine Question

sweetinglooney · Post by **sweetinglooney** » Tue Jun 21, 2005 5:39 pm

Hi, Trying to figure out how to remove the engine mount with no sucess, anyone managed to do this then help would be appreciated, many thanks,

Andrew

sweetinglooney · Post by **sweetinglooney** » Wed Jun 22, 2005 9:49 pm

bump!

SiDaBa · Post by **SiDaBa** » Wed Jun 22, 2005 10:49 pm

Sorry off subject but why are you wanting to remove the engine mount?

carmadaaron · Post by **carmadaaron** » Wed Jun 22, 2005 10:52 pm

better to PM 'ceedubya' hes in the process of a 1.8T into a 1.2 65hp 9n

sweetinglooney · Post by **sweetinglooney** » Thu Jun 23, 2005 10:49 am

Because i wanna get to my air filter and do some slight modifications to it

Andrew B · Post by **Andrew B** » Thu Jun 23, 2005 1:27 pm

You just pull it off, I did, after a leap of faith

pull back of it off 1st, then the front, when it is completely detached wiggle it side to side and rotate it to the right and turn it upside down then you should be able to get the res box cover off and access the filter, the engine cover is mounted on push fit connecters they are snug fitting so be sensible and increase your pulling gradually. the reason why you need to manover it to the right is there is some tube attached to the airbox that I didn't fancy removing as I have no idea what is it. HIH

SiDaBa · Post by **SiDaBa** » Thu Jun 23, 2005 2:52 pm

Engine Cover!!