New Polo - anyone know the wheel/hub specs?

Chat about your 9n Polo (inc GT and Fun)
Post Reply
dxg
Moderator
Posts: 1571
Joined: Sat Oct 19, 2002 9:28 pm
Location: Glasgow

New Polo - anyone know the wheel/hub specs?

Post by dxg »

Thinking seriously about tracing some aftermarket alloys - sounds like real VWs will be too expensive...

Anyone know the PCD and ET for the New Polo - is it the same as the MKIV Golf (that's what I'm hoping!)?

Anyone dealt with these people??
http://www.premier-wheels.co.uk/indexa.htm

Deek
polo2k
Bling Bling Diamond Member
Posts: 3297
Joined: Tue Dec 10, 2002 1:01 pm
Location: Swindon
Contact:

Post by polo2k »

im thinkin 5x100 but possibly 4x100 but im fairly sure its a 5 stud and an et of 38-42 ish
but i think priemier are just an importer
Nelson_Wilbury
Moderator
Posts: 1638
Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk

Post by Nelson_Wilbury »

The Polo accessories brochure lists some VERY nice 17" wheels called 'Exor'. VAG Part no. 6Q0071492666. Ask your local dealer to check accessories catalogue on ETKA for a picture. They retail at £150 each but you could probably easily haggle 10%+ off.

Neil
12-valve
New
Posts: 11
Joined: Fri Dec 06, 2002 9:12 am
Location: Kent

Post by 12-valve »

Don't know whether I should let you into a little secret, but here goes:
The New Polo has a five-stud bolt pattern (can't quite remember the PCD) with an offset of ET35, the same format as found in the rest of the VW range (Lupo excepted - it has a four-stud pattern). So that means all those five-stud wheels from the Mk3 Golf GTI onwards and, best of all, those lovely polished Audi Competition five-spokes from the TT should fit directly onto your New Polo.
Imagine a set of TT wheels on a New Polo 8)
Speedlaw
Moderator
Posts: 2852
Joined: Wed Nov 27, 2002 11:04 am
Location: Netherlands
Contact:

Post by Speedlaw »

Polo2K is right, they are 5x100.

TT wheels are yummy! :D
dxg
Moderator
Posts: 1571
Joined: Sat Oct 19, 2002 9:28 pm
Location: Glasgow

Post by dxg »

Polo accesories catalogue - didn't know they had one! - i _will_ investigate...

12-valve - that's _exactly_ the news I was looking for...

Thanks, everyone, for your advice.

Deek

/Wonders off to check bank balance.../
blackpologti
Bronze Member
Posts: 130
Joined: Mon Oct 21, 2002 1:48 pm
Location: Midlands
Contact:

Post by blackpologti »

how about a set of audi rs4 replica rims!! would look stunning!!
Nelson_Wilbury
Moderator
Posts: 1638
Joined: Fri Jan 10, 2003 10:17 pm
Location: Suffolk

Post by Nelson_Wilbury »

The TT wheels cost £400 though :shock: If you want similar rims your best off going for the A2/A3 17 inch style versions, they only cost about £170+ VAT I think.

Neil

dxg, they don't have a brochure. Rather a flyer with everything you can get. I work for an Audi dealership so I'm able to get them at cost. I just don't think its worth it on a 55bhp Polo. OH if only I had bought the 65 version... :oops:
Post Reply