Central Locking Pump - Location!

bsodmike · Post by **bsodmike** » Wed Jul 13, 2005 4:21 pm

I'm trying to install the MK4 Votex kit in my 9n MK6 polo and would like to know where the CPump resides.

Thanks!

Mike

inder · Post by **inder** » Wed Jul 13, 2005 5:51 pm

Non-existance as we discovered m8

Nelson_Wilbury · Post by **Nelson_Wilbury** » Wed Jul 13, 2005 8:03 pm

The 9n is a Cabus wiring system, so uses a Convienience Control Unit rather than a Central Locking Pump. So a MK4 Remote locking kit won't work

(first post on here in ages!)

inder · Post by **inder** » Wed Jul 13, 2005 9:35 pm

Hi Nelson, thanks for the info

Would you happen to know the exact location of the CCM in a Polo Mk5?

diagram is too vague?

thanks,

bsodmike · Post by **bsodmike** » Thu Jul 14, 2005 4:15 am

Nelson_Wilbury wrote:The 9n is a Cabus wiring system, so uses a Convienience Control Unit rather than a Central Locking Pump. So a MK4 Remote locking kit won't work

(first post on here in ages!)

Thanks for that bit of info dude...where *is* the CCM even located and what are my options for installing some kind of keyless entry etc?

prattieman · Post by **prattieman** » Fri Jul 15, 2005 12:10 pm

Hi bsodmike, is this something your after;

Votex Shop

(Hi to the board also)

inder · Post by **inder** » Fri Jul 15, 2005 3:13 pm

Hi!

That's interesting, says:

VW Polo (A04) 2002 ->2005

also a different part number to mine... could work... but if it runs of the ECU, where would you plug it?! In-line with the CCM?

prattieman · Post by **prattieman** » Fri Jul 15, 2005 5:11 pm

If i was to buy one of those, do you reckon the instructions would be in german only?

inder · Post by **inder** » Fri Jul 15, 2005 8:48 pm

Most likely in English too, not that important, can always translate

bsodmike · Post by **bsodmike** » Sat Jul 16, 2005 9:09 am

Ooh nice find guys

Of course my german sucks and I have contacted VAG and asked them to comment on this.