Help needed

Chat about your MKV (6N2) Polo GTi
Post Reply
hot_polo
Bronze Member
Posts: 192
Joined: Wed Jul 27, 2005 9:26 pm

Help needed

Post by hot_polo »

i have just braught a polo gti, but the gearbox does feel abit different to normal cars, its very open and feels loose is this normal?? or is my gearbox going :cry:
thanks guys
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

No it sounds fairly normal for the Polo to be honest! There is quite a bit of movement in the 'stick if you move it from side to side whilst engaged in gear, it just seems to be a trait of the car.

As long as the 'box changes gear smoothly and without drama, you should be fine. It can be quite notchy on a cold winter's morning but other than that OK.
hot_polo
Bronze Member
Posts: 192
Joined: Wed Jul 27, 2005 9:26 pm

Post by hot_polo »

Si_GTi wrote:No it sounds fairly normal for the Polo to be honest! There is quite a bit of movement in the 'stick if you move it from side to side whilst engaged in gear, it just seems to be a trait of the car.

As long as the 'box changes gear smoothly and without drama, you should be fine. It can be quite notchy on a cold winter's morning but other than that OK.
thanks for your help mate, the gear change is smooth,
the change from 1st to 2nd gear at around 5/6k revs is orgasmic lol :lol:
smokeGTI
Bronze Member
Posts: 182
Joined: Sun Jun 12, 2005 2:39 pm
Location: HK SAR

Re: Help needed

Post by smokeGTI »

hot_polo wrote:i have just braught a polo gti, but the gearbox does feel abit different to normal cars, its very open and feels loose is this normal?? or is my gearbox going :cry:
thanks guys
Beware, too much free play of the stick means the reverse gear
may not fully engaged. I've replaced the the bush of the linkage,
now the free play is a lot lesser, and not more crunch in reverse. :wink:
hot_polo
Bronze Member
Posts: 192
Joined: Wed Jul 27, 2005 9:26 pm

Re: Help needed

Post by hot_polo »

smokeGTI wrote:
hot_polo wrote:i have just braught a polo gti, but the gearbox does feel abit different to normal cars, its very open and feels loose is this normal?? or is my gearbox going :cry:
thanks guys
Beware, too much free play of the stick means the reverse gear
may not fully engaged. I've replaced the the bush of the linkage,
now the free play is a lot lesser, and not more crunch in reverse. :wink:
yes i have grinded it once already, it feels as its in reverse but it isnt really, but thats becoz im not used 2 the different cars that i drive
smokeGTI
Bronze Member
Posts: 182
Joined: Sun Jun 12, 2005 2:39 pm
Location: HK SAR

Re: Help needed

Post by smokeGTI »

yes i have grinded it once already, it feels as its in reverse but it isnt really, but thats becoz im not used 2 the different cars that i drive
It was not your fault, it is the common issue for our GTI,
some not even getting the first gear.

replace bush first, if problem still,it might need some aligment
for the linkage.
inder
Platinum Member
Posts: 1842
Joined: Sun Feb 27, 2005 8:37 pm

Post by inder »

Where is the bush, gearbox end inside engine bay or can be done at gearstick gaitor?
smokeGTI
Bronze Member
Posts: 182
Joined: Sun Jun 12, 2005 2:39 pm
Location: HK SAR

Post by smokeGTI »

inder wrote:Where is the bush, gearbox end inside engine bay or can be done at gearstick gaitor?
Image
Image
It's located under the firewall, you may test the rod that connected to the
metal cup as shown, see if it has free play.

Cheers
inder
Platinum Member
Posts: 1842
Joined: Sun Feb 27, 2005 8:37 pm

Post by inder »

Thanks for the diagrams, im not 100% sure where you are though, do you have a part number for the bush?
smokeGTI
Bronze Member
Posts: 182
Joined: Sun Jun 12, 2005 2:39 pm
Location: HK SAR

Post by smokeGTI »

inder wrote:Thanks for the diagrams, im not 100% sure where you are though, do you have a part number for the bush?
The part #6N0 -711-135 for the poly bush
#6N0-711-167-A for the dust boot if you need one.
They should cost within 12 pounds.

(don't forget to fill up the cup with synthetic grease)

Cheers
inder
Platinum Member
Posts: 1842
Joined: Sun Feb 27, 2005 8:37 pm

Post by inder »

thanks for the info :)
polo16vgti
New
Posts: 39
Joined: Thu Aug 04, 2005 9:13 pm
Location: northolt middlesex

Post by polo16vgti »

ive drove a couple an ye there all like that
Post Reply