Problem closing door

Detailing & Bodywork
Post Reply
jmk1
New
Posts: 29
Joined: Fri Aug 05, 2005 10:15 pm
Location: Oxfordshire

Problem closing door

Post by jmk1 »

My drivers door is out of alignment.Facing the car it's the very top

left hand corner . I have to slam the door very hard to close it .I don't

think this does the window glass any favours.

I assume the door can be adjusted on it's hinges can anyone on here

tell me how to do this. Many thanks.

JMK1
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Post by bstardchild »

Bumped from DIY Guides.......

Bottom line is unless you are telling a how to it doesn't belong in DIY guides :wink:
jmk1
New
Posts: 29
Joined: Fri Aug 05, 2005 10:15 pm
Location: Oxfordshire

Post by jmk1 »

Silly me DO IT YOURSELF.DIY there was I thinking it was a guide to

doing it yourself.




JMK1
jmk1
New
Posts: 29
Joined: Fri Aug 05, 2005 10:15 pm
Location: Oxfordshire

diy

Post by jmk1 »

On reflection .Perhaps DIY should be renamed How TO DIY



JMK1
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

:roll:

What model of Polo is it mate? Just wondering that if it's a newer car it may still be under warranty (up to three years old) and fixable for "free" :)

Can you take a photo of the offending panel for us, or the hinges? I don't honestly know whether the hinges would be a difficult job to adjust, but you might need a mate or two nearby to help with holding the door in the right place if your undoing/redoing hinges!

Could always ask your local friendly dealership to have a gander at it? Having stripped my driver's door down and pulled out the motor/runners/other associated gubbins I had the whole lot down at the dealership and just showed them what I had, described the problem, showed them the car and got the answers I needed with no hassle whatsoever 8)
BLACK6N_POLO
Silver Member
Posts: 269
Joined: Sun May 15, 2005 10:57 pm

Post by BLACK6N_POLO »

my door used to be out abit (6n mk4)-- i was told to move the catch on the piller of the car -- cant think of the proper name at the mo-- the metal thing tht the door hooks onto-- now it sits flush with the body work -- i was aslo told once u do this u may still have to play with the hinges--- a mechanic did this for me so i cnt really say to much about it!

hope i could help!
Post Reply