Right everyone, i know that im a new member and all but i was just interested to know how many of you would be interested in a high lift cam??
The cams that are available are G40 items, made by newman and are brand new.
profiles available are...... 264,270,272 or..... 296 for the wilder Owners!
In order to get a good deal I must order at least 5 prices are £150, but obviously the more I order the better! I will also work on getting free postage if possible.
If anyones interested please either PM me or email me @ [email protected].
if you are interested, to insure that i wont be landed with 5 or more cams, i will need a £20 deposit either paypal or cheque, once deposit has been received i will send a receipt by email or written if prefered.
high lift cams group buy (cheap!!!)
-
polovalver
- New
- Posts: 12
- Joined: Mon Jun 20, 2005 12:37 am
right then. the cams are cut from schrick blanks, the durations of the inlet is the same as the out let on all the cams.andybtsn wrote:Can we have more info?
Spec fo the cams? better improvements etc?
Gains vary from mild 2 wild!
powerband info..
(268, 2000-6500rpm)
(270, 2500-7000rpm)
(272, 3000-7500rpm)
(296, 4000-8000rpm)
these are the sort of engine mods that i would prob recomend to be used with each of the cams....
268 (good for standard engine)
270 (great if you have filter + exhaust)
272 (good with exhaust,chip + filter)
296 (lairy as hell, Best used with ported head,chip,filter,exhaust,solid lifters)
please note that this is just a rough guide as to what may produce the best performance gains and also maintain day to day driveabilty.
any other info please dont hesitate to contact me.
-
polovalver
- New
- Posts: 12
- Joined: Mon Jun 20, 2005 12:37 am