New Purchase

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
pettsy
Moderator
Posts: 1958
Joined: Tue Feb 04, 2003 6:38 pm
Location: Derbyshire
Contact:

New Purchase

Post by pettsy »

Impulse bid on ebay got me this beast :lol:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MEWN:IT

Image

:lol: anyone need any squareback bits?
Tahrey1043
Bling Bling Diamond Member
Posts: 5184
Joined: Thu Sep 18, 2003 1:15 am
Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
Contact:

Post by Tahrey1043 »

b*stard, i just got back from notts as well

if you can get my attention box-wise more than G40dave on porka has done (a CEG in Reading ... not sure on the exact ratios, and its 120 miles, but he quoted a good price and guarantees it works, not that i know him personally though :roll:) then that's a "yes, maybe" :D

is it definatley a breaker then?
Gareth_GT_Hatch
Platinum Member
Posts: 1116
Joined: Tue Mar 09, 2004 9:04 pm
Location: Manchester Drives: '83 GL Classic

Post by Gareth_GT_Hatch »

CEG has 8P ratios.
Karl_CLCoupe
Platinum Member
Posts: 1131
Joined: Thu May 06, 2004 11:43 am
Location: Southport AKA: Mr Sambuca
Contact:

Post by Karl_CLCoupe »

If the bulbs arent't blow on either the bulb symbol or the main LED, and the switch doesn't jam, dibs on the headlight switch please!

Karl.
polonuts
Bronze Member
Posts: 203
Joined: Wed Mar 31, 2004 12:59 pm
Location: Rhondda Valleys

Post by polonuts »

how much for the boot seal posted if its intact :?
Tahrey1043
Bling Bling Diamond Member
Posts: 5184
Joined: Thu Sep 18, 2003 1:15 am
Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
Contact:

Post by Tahrey1043 »

I wouldn't mind the..... the...

er...
damn, what was it now. Something i noticed whilst bent over the engine earlier....

...

bugger it where did that thought go?! I feel like James Mason as portrayed by Eddie Izzard.

Might well have been something along the lines of the headlamp switch 'n' all. The.. um... thingy. You know. That bit.

And the hot air feed pipe, too, mine is now officially knackered. Plus that rubber + hemp pretend-braided pipe that goes to the fuel vapour absorbtion thingamajig as i think it tore a bit when i removed it to get the airbox off.

EDIT!
The cap for the master cylinder! With the warning light contacts on it... mine's all busted - good for sealing the cylinder, bad for providing a warning if it springs a leak.
(and, what the heck ... the 5 speed gear knob :D)
Post Reply