wiring diagram

nickpolo · Post by **nickpolo** » Wed Nov 09, 2005 7:51 pm

anyone got a wiring diagram for the polo gti? need to know what wire does what when i take the drivers door panel off tommorrow

nickpolo · Post by **nickpolo** » Thu Nov 10, 2005 2:20 pm

does the haynes manual have the wiring diagrams in it?

inder · Post by **inder** » Thu Nov 10, 2005 2:23 pm

haynes manual only covers the non-GTi MK5, but contains diagrams at the back that should apply to the GTi too

what exactly are you trying to look up?

nickpolo · Post by **nickpolo** » Thu Nov 10, 2005 3:03 pm

i need to attach a little pcb to the locking/windows/alarm blah blah wiring on the drivers door, but cause the pcb is american, they don't know the wiring colours for the polo. ie - window down, alarm, bleh bleh - will the haynes manual tell me this? or if anyone has an idea -plleeaaasseeee

thanks

JWC · Post by **JWC** » Fri Nov 11, 2005 10:25 am

There is a post somewhere by a guy that does alarms, he told me the unlock, witched +ve wires etc. He is your man.

See http://www.tigerstyle.co.uk/poloforum/v ... hp?t=16572

nickpolo · Post by **nickpolo** » Fri Nov 11, 2005 10:52 pm

thanks james, have left a post for him, if however anyone else knows the following then please feel free to tell me -

i have a pcb from an american company that enables my remote alarm/central locking to shut/open the windows and sunroof, but i need to know what coloured wires i need to connect to, i need to make seven connections behind the trim in the drivers door, these are

1) rolldown control

2) lock sense

3) ground

4) rollup control/key sense

5) +12v

6) alarm led sense

7) unlock sense