FAO 9N owners

Chat about your 9n Polo (inc GT and Fun)
Post Reply
Scorpio1
Gold Member
Posts: 623
Joined: Sat Jun 28, 2003 10:36 pm
Location: London UK

FAO 9N owners

Post by Scorpio1 »

Could you help me please? I need a picture of the centre console, where the handbrake is etc (want to fit an armrest) and need a pic of the door sills (on a 3 door)

I would really appreciate it you guys :D
mole
Admin
Posts: 1334
Joined: Tue Oct 15, 2002 8:28 pm
Location: Kent

Post by mole »

Hope these help.
Please excuse the state of the interior, it's been too bloody hot to clean the car the last few weeks!

Image

Image
Scorpio1
Gold Member
Posts: 623
Joined: Sat Jun 28, 2003 10:36 pm
Location: London UK

Post by Scorpio1 »

Mole, you are 100% a star! Cheers mate.

Now all I wonder is if I can modify the rear cup holder to take the armrest or fit the Golf centre console...
mole
Admin
Posts: 1334
Joined: Tue Oct 15, 2002 8:28 pm
Location: Kent

Post by mole »

:D No probs.

What's a Golf centre console look like....? :?
Scorpio1
Gold Member
Posts: 623
Joined: Sat Jun 28, 2003 10:36 pm
Location: London UK

Post by Scorpio1 »

Wish I knew, but me thinks there has to be a way of mounting the armrest
dxg
Moderator
Posts: 1571
Joined: Sat Oct 19, 2002 9:28 pm
Location: Glasgow

Post by dxg »

Discussion about this on polo9n:
http://www.polo9n.com/phpBB2/viewtopic. ... c&start=15

You might want to use babelfush to make sense of that. But be aware, that the page numbers on the bottom right of the thread pages won;t work in "translation mode", you'll have to browse to the page in german and cut and paste the url for that thread into babelfish. But then again, you might speak german!

This is the site with the part for the 9n listed (in German :roll:)
http://www.raid-rdi.com/deutsch/index.h ... te=2&pps=3

Good luck!!

(Although, have you already sourced a part that you plan to use?)
Scorpio1
Gold Member
Posts: 623
Joined: Sat Jun 28, 2003 10:36 pm
Location: London UK

Post by Scorpio1 »

Well further investigation has shown that it is very hard to fit the armrest as it doesn't just need to sit in the plastic but also click in underneath in the actual metal of the car.

I am not going to give up but put this idea on hold for a while
des_pd_ tdi
Gold Member
Posts: 568
Joined: Mon Nov 18, 2002 5:17 pm
Location: London

Post by des_pd_ tdi »

So that's why the armrest was rock solid on my Golf.
ciden
Bronze Member
Posts: 214
Joined: Sun May 11, 2003 6:21 pm
Location: George, RSA (South Africa)

Post by ciden »

Jeez Mole.... clean that poor car!!! ...and what ya mean it's been to hot to clean it????? What's 38'C? :twisted:
mole
Admin
Posts: 1334
Joined: Tue Oct 15, 2002 8:28 pm
Location: Kent

Post by mole »

It'll be done tomorrow don't worry!!
Oh and 38oC is too bloody hot 8) :P
Scorpio1
Gold Member
Posts: 623
Joined: Sat Jun 28, 2003 10:36 pm
Location: London UK

Post by Scorpio1 »

It is cooler at least now!

Trying to wash your car in that heat = Impossible!!!
Post Reply