My GTI on the RR

Grum · Post by **Grum** » Tue Nov 15, 2005 7:02 pm

This is my 3rd time on the rollers makin 135.4bhp!!

listen close around 39 seconds, u can hear the note change slighty like a v(w)tec

its also a K&N induction kit makin all the noise!!

enjoy

http://video.google.com/videoplay?docid ... ble%3Atrue

ModifiedMadness · Post by **ModifiedMadness** » Tue Nov 15, 2005 8:25 pm

Cool vid Grum mate.

Del_GTi · Post by **Del_GTi** » Tue Nov 15, 2005 8:57 pm

Which Rolling Road is that mate?

Jordan · Post by **Jordan** » Wed Nov 16, 2005 1:54 pm

What mods you got done to your gti mate.

jon_poloV · Post by **jon_poloV** » Wed Nov 16, 2005 4:37 pm

my god jordan that car is looking so nice......driibble...

Grum · Post by **Grum** » Thu Nov 17, 2005 5:42 pm

Del_GTi, its the rollin road at my work, Falkland Performance Centre, in Fife.

Jordan, all i had was a K&N induction kit, main de-cat, and run on 97Ron fuel...
i now have a FSE power boost valve so i'll play wi that when i get my car back on the rollers at the weekend

PieGTi · Post by **PieGTi** » Fri Nov 18, 2005 7:32 pm

hi there, nice video.

Can you tell me where you got your FSE power boost valve, been trying to find one for ages. Can't seem to find one for the gti engine

Si_GTi · Post by **Si_GTi** » Fri Nov 18, 2005 11:30 pm

Grum wrote:Del_GTi, its the rollin road at my work, Falkland Performance Centre, in Fife.

Jordan, all i had was a K&N induction kit, main de-cat, and run on 97Ron fuel...
i now have a FSE power boost valve so i'll play wi that when i get my car back on the rollers at the weekend

You've got a power boost valve

I hope that combined with your other mods it does you more good than bad, although I think every application is different tbh. I asked about them a long time ago and was put right off thankfully. A mate of mine, who I mention in this thread, has still got his attached and instead of removing it to try and regain smooth running (it's a bit sick, his car) he has bought a brand new Peco duplex exhaust for something in the region of Â£400

Grum · Post by **Grum** » Sat Nov 19, 2005 11:00 am

PieGTi wrote:hi there, nice video.

Can you tell me where you got your FSE power boost valve, been trying to find one for ages. Can't seem to find one for the gti engine

i got the valve thru my work i mentioned earlier... its the same valve used for the golf vr6 although there is 2 types offitting, 1 with 2 bolts holding the original regulator, and the other style with 1 bolt holdin a clip that hold the original regulator, hope that helps?

si_GTi - since havin the valve on the car (i also have the wee pressure gauge to set pressure properly) it does actually feel a bit better on acceleration and on all my power curves so far, there is a small dip around 3000rpm (not just with my gti) so hopefully the FSE valve will take this dip out and give me a smooth curve!

also - i hope ur mate isnt putin this duplex peco thing on a gti??

im keepin my standard back box thank you please

Del_GTi · Post by **Del_GTi** » Sat Nov 19, 2005 11:07 am

How did you get the main decat mate?

Does it give a nice metallic sort of noise from it without being too loud?

Jordan · Post by **Jordan** » Sat Nov 19, 2005 11:44 am

What did you do with the probe sensor mate on the cat.

Si_GTi · Post by **Si_GTi** » Sat Nov 19, 2005 3:21 pm

Grum wrote:si_GTi - since havin the valve on the car (i also have the wee pressure gauge to set pressure properly) it does actually feel a bit better on acceleration and on all my power curves so far, there is a small dip around 3000rpm (not just with my gti) so hopefully the FSE valve will take this dip out and give me a smooth curve!

also - i hope ur mate isnt putin this duplex peco thing on a gti??
im keepin my standard back box thank you please

Don't worry mate he's not got a Polo, he's got a shabby looking 106 GTi

Del_GTi · Post by **Del_GTi** » Sat Nov 19, 2005 5:59 pm

Jordan wrote:What did you do with the probe sensor mate on the cat.

There is a lambda sleeve which you can buy to put the sensor in, i'm not sure how effective they are though.

I've heard that the EPC light may still come on intermittently.

Grum · Post by **Grum** » Sun Nov 20, 2005 4:47 pm

Jordan wrote:What did you do with the probe sensor mate on the cat.

i managed to get a bit straight pipe with a lambda boss in it so i just made the de-cat around that pipe which luckily is the same diameter as the original system pipe!

basically a bit straight pipe with the lambda hole, a sleeve section for each end and job done

there has never been any management faults comin up so it works fine!
remember the small pre-cat is still there!

Grum · Post by **Grum** » Sun Nov 20, 2005 4:50 pm

Del_GTi wrote:How did you get the main decat mate?

Does it give a nice metallic sort of noise from it without being too loud?

u can hear the de-cat note on half throttle when its not enough throttle to hear the induction noise, nice little tinny noise which i like to hear all the time! its not really loud as the induction noise takes over on full throttle, but drivin normally thru town i always give it just enough throttle to hear the de-cat

i love it lol