need help, will these fit??

mitty · Post by **mitty** » Thu Nov 17, 2005 12:35 pm

7J 16" et45 4x100 one piece 195/45/16 tyres. ok this is the spec of the wheels.will they fit a 1997 6n 1.4cl polo?? the alloys are from team dynamics. plzzzzz cud some1 help me. will they fit with no arch work/rolling,cutting??

david burton · Post by **david burton** » Thu Nov 17, 2005 12:50 pm

Ideally you want 40 profiles on them. but the offset is high so you may get away with it - those rears should fit inside the arches rather than rub - not too sure about your fronts.

is your car lowered much? if it's not lowered they should fit - if it is then the fronts may rub a little.

it's a 50:50 IMO

Polo Diesel · Post by **Polo Diesel** » Tue Nov 22, 2005 8:31 pm

should be cool i see a polo with 17" with a 35mm drop so i guess as long as the drop ant to bad should be okay man

16vTej · Post by **16vTej** » Tue Nov 22, 2005 9:15 pm

that offset may give u probs...with the wheels hitting the shocks

might need some spacers