Side Repeaters

ModifiedMadness · Post by **ModifiedMadness** » Sat Nov 19, 2005 1:29 pm

Also posted in MKV

I'm going to get some new side repeaters, but I'm not too sure how the old ones come off, I don't want to break them (which I would no doubt if I tried) Is there a technique to it?

Cheers

Si_GTi · Post by **Si_GTi** » Sat Nov 19, 2005 3:20 pm

You could have just bumped your old post

But if anyone can provide advice on getting the little buggers out without breaking them, I'd be interested! Got a pair to put on myself, I just haven't gotten off my lazy arse and done it yet - it's cooold!

ModifiedMadness · Post by **ModifiedMadness** » Sat Nov 19, 2005 4:35 pm

I forgot I had that one

mfa-polo · Post by **mfa-polo** » Sat Nov 19, 2005 8:53 pm

They're held on one side by a clip, (I think on the right). I would suggest a small screw driver, covered in some electrical tape.

vdubit · Post by **vdubit** » Sun Nov 20, 2005 9:09 am

if you're worried about breaking them the only real way is to remove the wing liner and unclip from behind. They have a lug on either one side or both (cant remember) that need squeezing inwards.

Reeyad · Post by **Reeyad** » Sun Nov 20, 2005 9:50 am

OK i did this mod on my mk4 polo i simply used a very small screw driver covered in tape and levered it out slowly.

The screw driver i used are the small 1s u use for electrical stuff u knw the small packs u can get different small screw drivers.

It was really easy to do am not 100% if its the same to do on the mk5..........

ModifiedMadness · Post by **ModifiedMadness** » Tue Nov 29, 2005 10:08 pm

Fitted them earlier, took all of about 2 minutes, didn't worry about tape on the screwdriver, didn't need it. They look a lot fresher now

cyhliu · Post by **cyhliu** » Tue Nov 29, 2005 10:21 pm

Yeah, I was going to say I can use my hands on mine, you just need to work out which side is the spring and push towards that side gently but firmly...

Yeah, ModifiedMadness, did you get the crystal ones? Mine were the frosted ones before and the crystals make a difference. Nice!

ModifiedMadness · Post by **ModifiedMadness** » Tue Nov 29, 2005 10:25 pm

Yeah I now have crystal ones http://www.abcdesignltd.com/ProductImages/B5-302.jpg they look a lot better than the frosted ones yeah.

Si_GTi · Post by **Si_GTi** » Tue Nov 29, 2005 10:26 pm

I've got a pair of the fresher crystal ones still to go on

just haven't gotten around to it. Which way do they push to release?

ModifiedMadness · Post by **ModifiedMadness** » Tue Nov 29, 2005 10:28 pm

I prized it out on the side nearest the door, you'll soon find out, just do it gently and it'll pop out easy as anything

Si_GTi · Post by **Si_GTi** » Tue Nov 29, 2005 10:30 pm

Cool

I'll try and get it done some time!

Reeyad · Post by **Reeyad** » Tue Nov 29, 2005 10:31 pm

ModifiedMadness wrote:Yeah I now have crystal ones http://www.abcdesignltd.com/ProductImages/B5-302.jpg they look a lot better than the frosted ones yeah.

Are these after market or standard as mine has them already the crystal ones that is......

Its an X reg, 1st registerd Dec 2000, but tracing engine code its 2001 model...

ModifiedMadness · Post by **ModifiedMadness** » Tue Nov 29, 2005 10:35 pm

As far as I know the standard ones are more like these ones http://www.abcdesignltd.com/ProductImages/A3-312.jpg

cyhliu · Post by **cyhliu** » Tue Nov 29, 2005 11:08 pm

Both are standard VW, you can order both from VW but I think the crystal ones came on later models,I thought 2001 onwards...mine is a 2000 and it had the frosted ones...