R32 Pedals??

polomk6 · Post by **polomk6** » Wed Aug 27, 2003 5:54 pm

I have a 1.4 tdi sport and i'm looking to buy the r32 pedals, do these fit the polo ?
if so where do i buy them from and what ones ( i saw people saying stuff about the LHD and RHD ones?)

thanks steve

dxg · Post by **dxg** » Wed Aug 27, 2003 7:34 pm

Hello "polomk6", and welcome to the forum - you'll like it here!

The answers to your pedals questions can be found in this thread:
http://www.tigerstyle.co.uk/poloforum/v ... php?t=1670

Post by **mole** » Thu Aug 28, 2003 4:07 pm

Yep welcome to the forum polomk6!

The R32 pedals.... There's been a bit of confusion over these and the 9N but I think it's all sorted now.

You will need 3xRHD pedals. The acc. cover will NOT fit over the pedal. It will need to be glued on top of the pedal. Once on, you'd never know

There was talk of the LHD acc. pedal fitting but this was unconfirmed on the 9N, until somebody e-mailed me telling me I was wrong and they had to glue it on as well

Hope this helps.
Mole

Emann · Post by **Emann** » Wed Sep 24, 2003 2:09 pm

No you DONT have to glue the pedals on. Just remove the "rubber" from the old pedals, and then put the R32 on. Its not easy, but absolutely NO GLUE should be used at all. It took me 30 minutes to do it.

You shall nok put the r32 pedals over the original pedals, the original pedals has to be removed, just "un-plug" them and put the R32Â´s on.

Post by **mole** » Wed Sep 24, 2003 6:32 pm

That is the case with the Clutch and Brake pedals yes... remove the existing cover and replace with the R32 cover. BUT, there is NO cover on the accelerator pedal, and neither the LHD or RHD R32 Pedal cover fits over this pedal.

I'm led to believe this is not the case on LHD cars, but it certainly is for us with RHD cars!

Hope this clears things up.

Mole