One touch windows ??

182_blue · Post by **182_blue** » Fri Mar 10, 2006 9:16 pm

Ok i disconected my battery the other day, now my one touch windows has stopped working, how do i re-activate it ?, i tried a search but couldnt find it

thx

Dangerous Dave · Post by **Dangerous Dave** » Fri Mar 10, 2006 10:26 pm

You can reset it by opening the window completely then closing it completely sometimes this doesn't always work on mine for some reason and I have to do it with the key in the door lock, hold it in the open position and allow the windows to open completely then lock it and hold it until they are shut.

Si_GTi · Post by **Si_GTi** » Fri Mar 10, 2006 10:29 pm

Pretty much spot on Dave.

JWC wrote:Hi,
Just a sperate thread for the 6n2 (mk5). Turn ignition on, wind window doen to the bottom and HOLD for about 10 seconds or until you hear a relay click, then it will work as normal.

I am not sure why mine lost the one touch thing, but I was sitting by a reservoir reading a book and got cold and wound the window up a bit and the ignition might have been on or off, or somthing, anyway, it confused it.

Works fine now.

inder · Post by **inder** » Sat Mar 11, 2006 12:07 am

Yep should do the trick, sometimes mine go funny and need to be 'reset' too

182_blue · Post by **182_blue** » Sat Mar 11, 2006 7:47 am

thx chaps, i will try it later

what2097 · Post by **what2097** » Fri Mar 17, 2006 7:36 am

I recently disconnected my battery and reconnected it, and was suffering from the same issue.
Thanks alot!