Clutch Query

r_penny23 · Post by **r_penny23** » Thu May 11, 2006 7:09 pm

Hi all

Got a new clutch cable put on my car, my clutch was really heavy, so much so that I have to take it in and out of gear in traffic.....too much of a workout if you ask me

After changing the cable the clutch dosnt seem any better. Does anyone know if this fault (needing a new clutch at 56k and being bloody hard work) is the norm.

Also, the killer question; how much am I looking at? And is there anything else I could do or does it definatly sound like the clutch?

r_penny23 · Post by **r_penny23** » Thu May 11, 2006 7:11 pm

forgot to add, its not the smoothest of changes either

Nickfowke86 · Post by **Nickfowke86** » Thu May 11, 2006 11:21 pm

May be silly question but have you checked the condition of the pedal box!?

r_penny23 · Post by **r_penny23** » Fri May 12, 2006 10:00 am

Nickfowke86 wrote:May be silly question but have you checked the condition of the pedal box!?

There does appear to have been repared at some point but it does have problems engaging which makes me believe it would be the clutch itself...what do you think

Can you repare the pedal box, does this cost a lot and can it solve it being so tough?

Nickfowke86 · Post by **Nickfowke86** » Fri May 12, 2006 10:03 am

My pedal box went and i couldnt engage gears!? My clutch pedal was nearly on the floor when it went so if all your pedals are level its probably not that!?

Just an idea?!

Good luck

r_penny23 · Post by **r_penny23** » Sun May 14, 2006 4:04 pm

Nickfowke86 wrote:My pedal box went and i couldnt engage gears!? My clutch pedal was nearly on the floor when it went so if all your pedals are level its probably not that!?

The clutch went today....sh*t!

The clutch pedal now is loose, in all directions in movement and not held in place at all. It feels free from the brake pedal and gas...is this the box thats brrken as well? You say you had the box go on you, did it cost a bit to repare? and do you think that this may be the problem...not the clutch.....help

The garage think its the clutch although I now think it may be the pedal box thats at fault. I just dont want to fix the clutch and it be the same

Nickfowke86 · Post by **Nickfowke86** » Sun May 14, 2006 11:54 pm

Box went on mine m8, Replacement pedal box i think was about Â£55 but labours a sod because its a pig of a job!!

Mine was done a few days ago by independant garage and took them total of 5-6 hours to do, so if thats what needs doing get someone who's done it before to tackle it!

Best bet is to take off the panel over the pedals under the dash (just three screws) wingle into the footwell and take a look fella!

Good Luck!

polo power · Post by **polo power** » Mon May 15, 2006 7:05 am

if your pedal box isnt broken and you have changed the cable, and its still stiff like mine was, its most prob your release bearing not sliding well on the shaft in the gearbox which is prob lacking grease, i replaced mine alone with a new clutch and its been fine ever since.

sorted · Post by **sorted** » Mon May 15, 2006 11:24 am

Nickfowke86 wrote:May be silly question but have you checked the condition of the pedal box!?

Ur Sig , im sure thats on the mway in Glasgow ?

Nickfowke86 · Post by **Nickfowke86** » Mon May 15, 2006 11:34 am

My sig!?
Its a Photoshop of an image i found on the forum!?

http://www.tigerstyle.co.uk/poloforum/v ... hp?t=21213

Cheers Demo 202

JWC · Post by **JWC** » Wed May 31, 2006 9:48 pm

polo power wrote:if your pedal box isnt broken and you have changed the cable, and its still stiff like mine was, its most prob your release bearing not sliding well on the shaft in the gearbox which is prob lacking grease, i replaced mine alone with a new clutch and its been fine ever since.

My clutch is heavy and creaks, I was thinking about replacing the cable, but it sounds like a common problem.

I have took off the kick panel and can see the whole pedal assembly, it looks fine to me, what am I looking for? Everyone seems to say ah yeah, the pedal box...... but does anyone actually know what the problem is, and what to look for? I see the cable coming in, and the cable attaching to the pedal. What can go wrong? From what people say it sounds like a weld fails and the pedal collapses, but you don't need a knew one, sort out a bearing for it.

I'm pretty certain that the heavy creakyness is down to the clutch release lever on the transmission. Anyone else had that?

Nickfowke86 · Post by **Nickfowke86** » Wed May 31, 2006 10:37 pm

Clutch Pedal mount goes on the left hand side!? ive got some pics of my old pedal box back home i could post over the next couple of days if that helps!??

JWC · Post by **JWC** » Thu Jun 01, 2006 9:12 am

Nickfowke86 wrote:Clutch Pedal mount goes on the left hand side!? ive got some pics of my old pedal box back home i could post over the next couple of days if that helps!??

It would immensely, we always have this issue, people band it about, but no one actually explaining the issue. Surely I can tig weld it, or completely machine a new bearing assembly?

theclient · Post by **theclient** » Thu Jun 01, 2006 10:25 am

hi read my post in the clutch 71000 miles thread on the gti forum

may help

Nickfowke86 · Post by **Nickfowke86** » Thu Jun 01, 2006 9:46 pm

Pic as promised, ignore the line of weld (previous botch repair from so called VW specialist!!!!!

)

UK-POLOS.NET - THE VW Polo Forum

Clutch Query

Clutch Query

Re: Clutch Query