lowering polo 60mm

nocksta · Post by **nocksta** » Thu Sep 14, 2006 6:01 pm

Hi,

I'm thinking of lowering my Polo by 60mm, but i dont know if it will be low enough, so dont know whether to purchase coilovers. Please can you send me pics of ur polo's lowered 60mm to help me decide.
Thanks

polo boi · Post by **polo boi** » Fri Sep 15, 2006 10:22 am

if ur buyin just springs go 60mm, i have that an i find it lower enuf but if ur gettin colies then u cud drop it more if u wanted it really slammed.

DanDiesel · Post by **DanDiesel** » Fri Sep 15, 2006 10:41 am

what size alloys will ur car be on? if its 15s or 16s then 60mm should be low enough!!

SAM_MK4_19D · Post by **SAM_MK4_19D** » Fri Sep 15, 2006 12:10 pm

Piccys should help. Mines -60mm all round on a full jamex kit. The ronals are obviously 15's.

Here's one while we were half done. It shows how much of a difference -60mm makes.

You could go lower if you went for coilovers but depends how practical you want it to be. My bottom arms rub on the kerb if I park with 2 wheels on a pavement. Hope it helps and good luck.

olop_chris · Post by **olop_chris** » Fri Sep 15, 2006 1:19 pm

Look at my sig below, thats 60mm

DanDiesel · Post by **DanDiesel** » Fri Sep 15, 2006 2:18 pm

olop_chris wrote:Look at my sig below, thats 60mm

may be better with a pic without the grass Chris, it does seem to make the car look even lower than it actually is!!

nocksta · Post by **nocksta** » Fri Sep 15, 2006 2:45 pm

Cheers guys!
I have got 15's on at the moment, and am dropped 40mm, but want to go lower!
I looked at coilovers, but they seem to be rather expensive for a student!!
Just spreayed my rear lights today, will post some pics soon!

olop_chris · Post by **olop_chris** » Fri Sep 15, 2006 4:00 pm

DanDiesel wrote:
olop_chris wrote:Look at my sig below, thats 60mm
may be better with a pic without the grass Chris, it does seem to make the car look even lower than it actually is!!

I know, but on that pic it looks higher than on concrete...strange ey?

Ill post one up laters anyway

DanDiesel · Post by **DanDiesel** » Fri Sep 15, 2006 4:27 pm

thats just freaky mate

RR Livi · Post by **RR Livi** » Sun Sep 17, 2006 11:26 am

mine are 60mm front and 40mm rear

might put the rear lower

what you guys think?

6NBen · Post by **6NBen** » Sun Sep 24, 2006 3:35 pm

I would go for 60 mm mate its low enough to be driven comfortably without rolling or anything:)

6NBen

Biddy17 · Post by **Biddy17** » Sun Sep 24, 2006 4:37 pm

How much is it to lower it anyway?

Is it just a case of buying new springs and fitting them yourself?

polo boi · Post by **polo boi** » Mon Sep 25, 2006 7:46 am

RR Livi, go the same all round man.

and 60mm ona spring kit is just about comfortable, if u were able 2 go lower on springs, u wud most likely feel every crack on the road never mind bump, colies solve that problem im sure or at least help for wen u wanna go lower.

polopowah · Post by **polopowah** » Mon Sep 25, 2006 11:37 am

get yourself a set of coil-overs mate
you'll regret getting -60mm springs if you want to get rid of that gap between the tyre and arch

-Ben-

polo boi · Post by **polo boi** » Mon Sep 25, 2006 8:17 pm

only dependin on what size rims u get with the springs, get 16's an that will fill the gap