A Good Lowering kit and exhaust

(PoLoBoI) · Post by **(PoLoBoI)** » Sun Mar 25, 2007 7:21 pm

whats the best springs or kits and which make and which exhaust is best i want a small but good sounding 1 from cat back and 1 that dnt look stupid this is for a 1.0 mpi

cheers

(PoLoBoI)

Arnoldo · Post by **Arnoldo** » Sun Mar 25, 2007 8:54 pm

http://www.clubpolo.co.uk/forum/index.p ... opic=35534 - Exhaust

http://www.clubpolo.co.uk/forum/index.p ... =0&start=0 - Good Lowering Kits

polopowah · Post by **polopowah** » Mon Mar 26, 2007 3:02 pm

Suspension - Coilovers (FK,Weitec)
Exhaust - Scorpion or powerflow are pretty good

i've got a twin DTM scorpion full system on my 1.0 and it doesn't look or sound stupid (like barryboyish cars do!)
-Ben-

(PoLoBoI) · Post by **(PoLoBoI)** » Mon Mar 26, 2007 6:14 pm

cheers ben thanx if ya dnt mind cud i av a pic of the back end of ur car to see how it looks coz i always thought of DTM lookin abit well cheers anyways thanx

(PoLoBoI)

polopowah · Post by **polopowah** » Mon Mar 26, 2007 6:22 pm

yo
this was the most recent pic took from last years show.
will have to clean and polish her up and take some more recent pics!

-Ben-

(PoLoBoI) · Post by **(PoLoBoI)** » Mon Mar 26, 2007 6:27 pm

that is 1 ace motor how did ya do the induction kit on it it baffles me but its kl and it looks sweet with the exhuast like that i like it cheers mate thanx

polopowah · Post by **polopowah** » Mon Mar 26, 2007 8:24 pm

bearing in mind, at that point the exhaust bracket was broken, its fixed now and sits abit nearer the bumper.
thanks for the good comments. the induction kit was a hit and miss affair and i just went for it and cut the hole, luckily it fit nicely first time!

-Ben-

polopowah · Post by **polopowah** » Mon Mar 26, 2007 8:29 pm

just looked at your polo, looks good and will look better when you lower it.

p.s - where did you get that splitter? how much was it and was it easy to fit? i need a new one because my reiger splitter got smashed on a speedbump

-Ben-

(PoLoBoI) · Post by **(PoLoBoI)** » Mon Mar 26, 2007 8:40 pm

yer thanx erm i found mine on the side of the road lol lucky find and as far a i know its off a SEAT dunno which 1 but it had sum modifacations erm first i tryed fitting with the clips but they dnt fit so i sawn some off and some short then it cliped in but wasnt secure enuff so i put sum short screws n with washers on and screwed em on then at either end sawn the exess plastic off quite hard to do best with 2 people really so thats it it sounds easy by sayin it but its a ball acre k mate

k mate i think its off a seat cupra 1 of the first 1s with the square lights at the bk

polopowah · Post by **polopowah** » Tue Mar 27, 2007 10:58 am

ok, cool thanks, that is a lucky find indeed.
people are selling them on ebay for about 30 euros, just wondered if it was a straight fit or not, well i dont mind abit of hassle hehe

-Ben-

(PoLoBoI) · Post by **(PoLoBoI)** » Tue Mar 27, 2007 5:42 pm

its not to bad ben just abit fiddly on the screwing on bit other than tha its ok well anyways cheers for ya time and its gud to speek to ya

(PoLoBoI)

polo power · Post by **polo power** » Tue Mar 27, 2007 6:57 pm

ive got dome evo coilovers for sale brand new never been fitted?

(PoLoBoI) · Post by **(PoLoBoI)** » Tue Mar 27, 2007 8:32 pm

ben its off a car like this