those running coilovers

Chat about your 9n Polo (inc GT and Fun)
ModifiedMadness
Sponsor
Posts: 6769
Joined: Tue Jun 14, 2005 8:38 pm
Location: Bedford Drives: MK5 Golf R32

Post by ModifiedMadness »

I'm on V1's, not a bad ride at all.

I'm only down about 50mm but I've already cracked my splitter after pulling into a curb and heard a slight rub when demonstrating to someone how much it's improved the handling around a roundabout (was a slight dip in the road) :lol:
grant hunter
Getting There!
Posts: 52
Joined: Wed Sep 27, 2006 7:10 pm
Location: Glasgow

lower springs for coilovers

Post by grant hunter »

does anyone know if you can get springs that take you down lower on coilovers as the rear is two high and taking out a platform bit wont make it that much lower?? any ideas??
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Re: lower springs for coilovers

Post by david burton »

grant hunter wrote:does anyone know if you can get springs that take you down lower on coilovers as the rear is two high and taking out a platform bit wont make it that much lower?? any ideas??
nope, sorry, take out the guide and the rubber but would give you 1/2 an inch
grant hunter
Getting There!
Posts: 52
Joined: Wed Sep 27, 2006 7:10 pm
Location: Glasgow

Post by grant hunter »

a was going take both bits out an leave the rea resting on the craddle bit? see how a go with that!! and any one speak german av tryed to order these but cant get any where Optik Seitenschwellersatz Polo 9N3 + 9N they are off in tuning web site
M7
Gold Member
Posts: 658
Joined: Sun Jul 18, 2004 11:55 pm
Location: Newcastle & East Mids
Contact:

Post by M7 »

im sure you can order custom springs for coilovers direct from FK
ie. a smaller spring with a higher level of compression.

i dont know the pressure at all, but for instance normal coilovers have say 20pound springs. you can order a smaller spring that needs 30pounds to compress to compensate for it being smaller
usually done on track cars which are solid. i can see it being very bumpy though
User avatar
TimGti
Silver Member
Posts: 325
Joined: Thu May 04, 2006 2:30 pm
Drives: 9n3 1.9 Tdi Sport
Location: South Coast

Post by TimGti »

mikehowett wrote:I'm considering getting a set of Eibach coilovers for my 9n. If I bought a set, would that contain everything I would need to upgrade my current sports suspension?? Sorry for the n00bish question! :oops:
I have heard that the eibach ones dont go very low on 9N's? Be sure to check this beause your kind of defeating the point somewhat if you cant deck it.
speedsix
Bronze Member
Posts: 192
Joined: Mon May 29, 2006 9:26 pm
Location: Glasgow, Scotland

Post by speedsix »

TimGti wrote:
mikehowett wrote:I'm considering getting a set of Eibach coilovers for my 9n. If I bought a set, would that contain everything I would need to upgrade my current sports suspension?? Sorry for the n00bish question! :oops:
I have heard that the eibach ones dont go very low on 9N's? Be sure to check this beause your kind of defeating the point somewhat if you cant deck it.
This is mine lowered nearly all the way on Eibach coilovers. Personally I wouldnt want to go any lower than this anyway, so Im happy with it. :D

Image
tapie
New
Posts: 5
Joined: Sat Jan 27, 2007 12:14 pm

Post by tapie »

This is mine lowered nearly all the way on Eibach coilovers. Personally I wouldnt want to go any lower than this anyway, so Im happy with it.
Speedsix, how low are u currently and are u using different drop links?
speedsix
Bronze Member
Posts: 192
Joined: Mon May 29, 2006 9:26 pm
Location: Glasgow, Scotland

Post by speedsix »

tapie wrote:
This is mine lowered nearly all the way on Eibach coilovers. Personally I wouldnt want to go any lower than this anyway, so Im happy with it.
Speedsix, how low are u currently and are u using different drop links?
I think im probably nearly all the way down on the Eibach's so probably 55-60mm (im on 195/45/16 tyres).

To your next question, no idea. Im not too technical on the suspension stuff :?
Post Reply