Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hmmmm I have a set of mudflaps with that part number but they don't fit on my Gti....The screw holes on the mudflaps don't match the holes pre drilled in the arches....
Your supposed to create new holes with the self taping screws included. Its all in the instructions.
pootas wrote:
Hmmmm I have a set of mudflaps with that part number but they don't fit on my Gti....The screw holes on the mudflaps don't match the holes pre drilled in the arches....
Your supposed to create new holes with the self taping screws included. Its all in the instructions.
the instructions i have dont have words
Your lucky you have instructions!! I don't have any...
on the rears you need to use an existing bolt plus the self tappers and make a hole for the nut and bolt thing and the fronts you need to use the existing torx25 screws and the clip that comes in the box to hold on the arch. mine scrape goin up slight slopes as its sittin low
polo_gti21 wrote:on the rears you need to use an existing bolt plus the self tappers and make a hole for the nut and bolt thing and the fronts you need to use the existing torx25 screws and the clip that comes in the box to hold on the arch. mine scrape goin up slight slopes as its sittin low
Might seem like a stupid question but...
On the front flaps there is a flap of rubber where the clips fit...
Now does the flap of rubber go inbetween the arch and the arch lining and then the metal clip on top?? At the moment I have the rubber flap just folded over and the metal clip behind the arch and lining....
polo_gti21 wrote:on the rears you need to use an existing bolt plus the self tappers and make a hole for the nut and bolt thing and the fronts you need to use the existing torx25 screws and the clip that comes in the box to hold on the arch. mine scrape goin up slight slopes as its sittin low
Might seem like a stupid question but...
On the front flaps there is a flap of rubber where the clips fit...
Now does the flap of rubber go inbetween the arch and the arch lining and then the metal clip on top?? At the moment I have the rubber flap just folded over and the metal clip behind the arch and lining....
ive just moved the lining back a bit the rubber flap then folds round the inside of the arch to protect paint and the clip goes over that.
