DashBoard Lighting

Chat about your 9n Polo (inc GT and Fun)
LowPoloCo.
Silver Member
Posts: 397
Joined: Sat Sep 09, 2006 5:28 pm
Location: Hampshire

Post by LowPoloCo. »

haha guys, especially paul and dino, you know me by now! :lol:

these LED sidelights are red, haha TO MATCH MY NEONS DINO!!! :D

so if you were woried about yours looking a little blue, paul, and would like Red, then please feel free to check ebay!

haha>>>>

Image

im working on the guide, bare with my guys

ell
LowPoloCo.
Silver Member
Posts: 397
Joined: Sat Sep 09, 2006 5:28 pm
Location: Hampshire

Post by LowPoloCo. »

ok ok

guide!

so, firstly, the H7s,

if you can see this on your car, its a bit easier, but basically, after removing the weather cap, you'll notice that theres a two pronged lever on the body-work side of each light, if you pull this down until it clicks, the bulb socket will lift straight out.

Image

looking like this:-

Image

so, once you got this out, then simply tug the bulbs out of the socket, and replace, then do the above process in reverse, put the bulb back in, with the little metal tab at the top, and click the initial lever thingy back up,

Image

Image

so thats the H7s done,

should look something like this...

Image

and give this result,

Image

ok, so now sidelights...

bit more tricky, not for any reason other than they are in an awkward place...it was hard enough taking a picture of them!!! :roll:

but basically, these tabs on the sidelight socket squeeze inwards, and with a lot of fiddling about, and general faffing, they will come out,

my technique was to grab the sockets with my first set of knuckles (i think theyre knuckles - the joints nearest your finger nails) this gave me room to yank at them...

Image

once theyre unleashed, just swap the bulbs, and clip the lil guys back in and your done.

:wink:

hope this helps!?

ell
dino
Sponsor
Posts: 3023
Joined: Wed Jun 08, 2005 11:59 am
Location: Milton Keynes

Post by dino »

i give you a few days before you are stopped and beaten up by the police!

Red lights at the front is a big No No - we have had this conversation before Ell. :roll:
LowPoloCo.
Silver Member
Posts: 397
Joined: Sat Sep 09, 2006 5:28 pm
Location: Hampshire

Post by LowPoloCo. »

fancy a sweepstakes?

how long till im caught? :lol:
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Post by david burton »

if you drive the car daily, I reckon 2 weeks
chris4500uk
Bronze Member
Posts: 124
Joined: Tue Jan 09, 2007 10:00 am
Location: Middlesbrough

Post by chris4500uk »

daily, less than a week, depending on police presence
panda
Silver Member
Posts: 355
Joined: Tue Feb 28, 2006 6:14 pm

Post by panda »

first "cruise" you go to, police will have you.
mc_iver_9n
Gold Member
Posts: 775
Joined: Tue Nov 15, 2005 12:14 pm
Location: Newbury, BERKSHIRE

Post by mc_iver_9n »

Cheers for the pics and guide Ell. Looks awsome. Can't wait to get mine now. Did you manage to do it with the bumper on?
SiDaBa
Sponsor
Posts: 1494
Joined: Fri Jul 25, 2003 12:45 am
Location: Crayford, Kent, UK
Contact:

Post by SiDaBa »

mc_iver_9n wrote:Cheers for the pics and guide Ell. Looks awsome. Can't wait to get mine now. Did you manage to do it with the bumper on?
I'd hope so it's a 1.2 with plenty of space in the engine bay. Was really easy to change mine when I had a 1.2 with out removing the bumper
LowPoloCo.
Silver Member
Posts: 397
Joined: Sat Sep 09, 2006 5:28 pm
Location: Hampshire

Post by LowPoloCo. »

yeh it was really easy on the 1.2 mate, not sure about other models though
chris4500uk
Bronze Member
Posts: 124
Joined: Tue Jan 09, 2007 10:00 am
Location: Middlesbrough

Post by chris4500uk »

Ive done it all on the 1.9 tdi, so i guess that gives me the least amount of space.

All without removing the bumper, altho you need tiny hands
mc_iver_9n
Gold Member
Posts: 775
Joined: Tue Nov 15, 2005 12:14 pm
Location: Newbury, BERKSHIRE

Post by mc_iver_9n »

Got the Xenons in and there amazing! Still can't get the bloody sidelights out tho! lol. Ive squeezed and wriggled and they wont budge. Is there any twist or just a good yank?
SiDaBa
Sponsor
Posts: 1494
Joined: Fri Jul 25, 2003 12:45 am
Location: Crayford, Kent, UK
Contact:

Post by SiDaBa »

mc_iver_9n wrote:Got the Xenons in and there amazing! Still can't get the bloody sidelights out tho! lol. Ive squeezed and wriggled and they wont budge. Is there any twist or just a good yank?
Two clips either side of the sidlight holder you should be squeezing. While squeezing them just pull that's it
chris4500uk
Bronze Member
Posts: 124
Joined: Tue Jan 09, 2007 10:00 am
Location: Middlesbrough

Post by chris4500uk »

mc_iver_9n wrote:Got the Xenons in and there amazing! Still can't get the bloody sidelights out tho! lol. Ive squeezed and wriggled and they wont budge. Is there any twist or just a good yank?
I found it easy to press both sides and do a circular motion while pulling, vigorous mind
Post Reply