Can anyone solve this one ?

Chat about your MKV (6N2) Polo GTi
Post Reply
thedees1
Sponsor
Posts: 268
Joined: Fri Feb 24, 2006 3:41 pm
Location: edinburgh/livingston, drives: polo gti red 5dr

Can anyone solve this one ?

Post by thedees1 »

Well here goes,

The good old engine electric has been on for a while, and when i download the system with vag-com i get the 2 following errors in the engine module,

1. Camshaft timing adj (bank 1) intermitent
2.EVAP purge valve intermittent

I decided to have a look through every fuse, I came across 2 that had blown 1 for the heated rear windscreen and the other (fuse number 30 ) for the engine electric system.

I cleared all the fault codes and reset the light and replaced both fuses,after a day of driving without the light coming back on,the next day i started her up to find the light on again. i checked fuse number 30 and it had blown again, ive now tried the above 3 times but fuse 30 keeps blowing.

Does anyone have any ideas why it my be doing this.
dubpolo
Sponsor
Posts: 1494
Joined: Sun Dec 07, 2003 12:08 am
Location: ellesmere port

Post by dubpolo »

its shorting out somewhere or a faulty part is causing it to blow.

hope you find out what it is, i get things like this and being a mechie it makes my brain over heat!

good luck
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

1. Camshaft timing adj (bank 1) intermitent
Was on my ECU after the timing belt slipped.
Post Reply