TT peddle mod...

tegwin · Post by **tegwin** » Sat Sep 08, 2007 8:16 pm

I saw a picture the other day of a GTI with TT peddles...they look smart!!

Where is the best place to get the peddles from?

Is it the entire peddle that you replace, or just the pad on the end?

MaxZ · Post by **MaxZ** » Sat Sep 08, 2007 8:25 pm

You can get them new from either VW or Ebay.
Take your pedals off and these should slip on, the accelerator pedal tends to be bigger so will have to be glued on.

Si_GTi · Post by **Si_GTi** » Sat Sep 08, 2007 10:29 pm

You will need RHD clutch and brake pedal "rubbers" (I know, I know, they are actually metal and rubber, yes) and LHD gas rubber as this is the best fit.

Clutch and brake are a direct swap and gas just needs some double-sided sticky tape or araldite or some such to secure it. There are many many many posts about fitting if you do a search

Cheers

Mouse_GTI · Post by **Mouse_GTI** » Sat Sep 08, 2007 11:12 pm

My accelerator pedal just went straight on. No problems with it falling off at all

DanDiesel · Post by **DanDiesel** » Sun Sep 09, 2007 11:01 am

ebay, vagparts, or just a vw dealer would be able to sort you out with a set of these.
i bought my last set from ebay for about Â£20!

nafeGTI · Post by **nafeGTI** » Sun Sep 09, 2007 6:41 pm

I had to glue my accelerator one on, got them for about Â£25 from ebay

jonners_gti · Post by **jonners_gti** » Mon Dec 10, 2007 11:49 pm

i'm thinkin of making this my first mod.

does everyone agree you need RHD clutch and break and LHD accelerator pedals? or does the RHD accelerator pedal fit fine too?

thanks

Tim_GTi · Post by **Tim_GTi** » Tue Dec 11, 2007 2:46 am

jonners_gti wrote:i'm thinkin of making this my first mod.

does everyone agree you need RHD clutch and break and LHD accelerator pedals? or does the RHD accelerator pedal fit fine too?

thanks

correct,

I have this, I used araldite (glue) on the LHD accelerator, the other two fit like a glove.

Also i'd advise getting them from www.vagparts.com, they do a good price for the set, search in the product overview> VW> polo> interior> pedal rubbers.

Or give them a ring their willing to help

nafeGTI · Post by **nafeGTI** » Tue Dec 11, 2007 11:20 am

i bought the RHD kit and had to glue the accelerator, a great simple mod tho

jonners_gti · Post by **jonners_gti** » Tue Dec 11, 2007 1:32 pm

Tim_GTi wrote:
jonners_gti wrote:i'm thinkin of making this my first mod.

does everyone agree you need RHD clutch and break and LHD accelerator pedals? or does the RHD accelerator pedal fit fine too?

thanks
correct,

I have this, I used araldite (glue) on the LHD accelerator, the other two fit like a glove.

Also i'd advise getting them from www.vagparts.com, they do a good price for the set, search in the product overview> VW> polo> interior> pedal rubbers.

Or give them a ring their willing to help

yup had a look on vagparts. the LHD accelerator pedal is Â£1.46 cheaper than the RHD one!!

i'm guessing you have to take the current pedal rubbers off before you put these ones on?

Tim_GTi · Post by **Tim_GTi** » Tue Dec 11, 2007 10:23 pm

jonners_gti wrote:
i'm guessing you have to take the current pedal rubbers off before you put these ones on?

yep

CymruPolo · Post by **CymruPolo** » Tue Dec 11, 2007 10:53 pm

A simple but effective mod

nogwuy · Post by **nogwuy** » Fri Dec 14, 2007 11:20 pm

r32 pedal covers also fit with persuasion, but are a bit more pricey

the tt ones are thinner alluminium and the accelorator one bends quite easily to match the curve of the accelorator. ive got tts on the polo and have also fitted them to my previous mk2 golf 16v and mk3 golf gti with relative ease. if the rubbers are stiff to get on then drop them into a cup of boiled water for a few seconds to loosen them up