Lookin good mate...loveing the silver BMC.
Quick question..what bend is that taking the BMC onto the Throttle body?
my silver BMC
but I'll have turbo power to keep me happy instead 
-
Kam Racing
- Bronze Member
- Posts: 227
- Joined: Fri Mar 16, 2007 12:34 pm
- Location: St. Albans
- Contact:
-
Kam Racing
- Bronze Member
- Posts: 227
- Joined: Fri Mar 16, 2007 12:34 pm
- Location: St. Albans
- Contact:
Re: my silver BMC
does that price include a breather filter & delivery?polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for £159 inc vat
from euro styling.
-
polo_gti21
- Silver Member
- Posts: 296
- Joined: Tue Mar 06, 2007 7:40 pm
- Location: West London
Re: my silver BMC
didnt include breather filter as they didnt have one in stock and yes it was delivered but it was only £165 with it. and Rupy its a 90degree bend,70mm diameter. you may need to trim it to fit if you get a SFS pipe.Kam Racing wrote:does that price include a breather filter & delivery?polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for £159 inc vat
from euro styling.
Last edited by polo_gti21 on Sun Sep 16, 2007 6:19 pm, edited 1 time in total.
-
polo_gti21
- Silver Member
- Posts: 296
- Joined: Tue Mar 06, 2007 7:40 pm
- Location: West London
-
Kam Racing
- Bronze Member
- Posts: 227
- Joined: Fri Mar 16, 2007 12:34 pm
- Location: St. Albans
- Contact:
I can supply them for £16 + postage if you're interested..Rupy wrote:Where do you get these 90deg bends from mate? Also do they go straight onto the filter?
http://www.kam-racing.com/product_info. ... cts_id/700
all you need is a couple of jubilee clips to secure it to the BMC and throttlebody if you need these too just let me know..
-
Kam Racing
- Bronze Member
- Posts: 227
- Joined: Fri Mar 16, 2007 12:34 pm
- Location: St. Albans
- Contact:
Re: my silver BMC
shame could have saved you a tenner..polo_gti21 wrote:didnt include breather filter as they didnt have one in stock and yes it was delivered but it was only £165 with it. and Rupy its a 90degree bend,70mm diameter. you may need to trim it to fit if you get a SFS pipe.Kam Racing wrote:does that price include a breather filter & delivery?polo_gti21 wrote:hey there people i have just got my BMC induction kit but opted for the limited edition silver one as i havent seen any1 with one of theses yet. anyway i got a right bargain, i managed to get the kit for £159 inc vat
from euro styling.
-
polo_gti21
- Silver Member
- Posts: 296
- Joined: Tue Mar 06, 2007 7:40 pm
- Location: West London
-
Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
polo_gti21 wrote:oh well its only a tenner, still a bargin in my eyes. can any1 recommend a company or person that can fabricate me a custom air intake to the bmc? as the duct supplied in my eyes looks ugly.
you can buy the tubing off ebay, seach the DIY section Mouse did a guide on how to do one, and where to get it from
-
polo_gti21
- Silver Member
- Posts: 296
- Joined: Tue Mar 06, 2007 7:40 pm
- Location: West London
i remember reading it mate but its still the same stuff just abit bigger im after a custom stainless one.Tim_GTi wrote:polo_gti21 wrote:oh well its only a tenner, still a bargin in my eyes. can any1 recommend a company or person that can fabricate me a custom air intake to the bmc? as the duct supplied in my eyes looks ugly.
you can buy the tubing off ebay, seach the DIY section Mouse did a guide on how to do one, and where to get it from