http://cgi.ebay.co.uk/Centre-Console-AR ... dZViewItem
thiking of getting one as they aint that expensive at £25 all in.
Any one got a guide for fitting one
Any one bought this specific one either?
Phil
Middle arm Rest
-
PHILIP1193
- Bronze Member
- Posts: 164
- Joined: Mon Nov 15, 2004 9:47 am
- Location: Shrewsbury
-
M7
- Gold Member
- Posts: 658
- Joined: Sun Jul 18, 2004 11:55 pm
- Location: Newcastle & East Mids
- Contact:
i bought one. mine is very wobbly, but a member on here did a guide to make it stable. means cutting metal and fixing it to the car chasis in the right places etc
i just lean an elbow on mine when im driving on motorways so i dont have a great use for it being 'too stable'. depends what you're after
always a good mod though
i just lean an elbow on mine when im driving on motorways so i dont have a great use for it being 'too stable'. depends what you're after
always a good mod though
I got mine, was wobbly, it annoyed the hell out of me.
So...
Using an power screwdriver (mini-drill), I put in 4 (around) 2-inch self-tapping screws and put them in each end of the 2 grooves you have on the bottom part of the armrest. I then put 2 of the 2-inch screws (instead of the ones you get in the pack) on the back of the armrest where you're meant to put the screws.
Now it's stable as a rock!
I believe it's the carpet I'm using to hold it (as it won't go down further due to the metal of the car), but as I have 6 big screws instead of just 2 small ones, It's holding well.
So...
Using an power screwdriver (mini-drill), I put in 4 (around) 2-inch self-tapping screws and put them in each end of the 2 grooves you have on the bottom part of the armrest. I then put 2 of the 2-inch screws (instead of the ones you get in the pack) on the back of the armrest where you're meant to put the screws.
Now it's stable as a rock!
I believe it's the carpet I'm using to hold it (as it won't go down further due to the metal of the car), but as I have 6 big screws instead of just 2 small ones, It's holding well.
-
PHILIP1193
- Bronze Member
- Posts: 164
- Joined: Mon Nov 15, 2004 9:47 am
- Location: Shrewsbury
is yours based on the one off ebay i posted at the start of this thread or just one like it?daa709 wrote:I got mine, was wobbly, it annoyed the hell out of me.
So...
Using an power screwdriver (mini-drill), I put in 4 (around) 2-inch self-tapping screws and put them in each end of the 2 grooves you have on the bottom part of the armrest. I then put 2 of the 2-inch screws (instead of the ones you get in the pack) on the back of the armrest where you're meant to put the screws.
Now it's stable as a rock!
I believe it's the carpet I'm using to hold it (as it won't go down further due to the metal of the car), but as I have 6 big screws instead of just 2 small ones, It's holding well.
Phil
I'll get some pics soon, my dad's borrowing the car while his Merc is in for long service.
Yeh it's the same one as you found on eBay. It's gone down in price since! Put it in how it tells you to, then just use the 6 self tapping screws like I said before and it will work. Only problem, when you have it in the up (outta the way) position, you can see the screws and you may find them ugly! So get black ones if you can.
It hovers above the handbrake, but its no problem. I've gotten used to the gear changes and handbrake usage with it there, and I can tell you its very comfortable and the driving position reminds me of my brother's BMW 3 series (which I love).
Yeh it's the same one as you found on eBay. It's gone down in price since! Put it in how it tells you to, then just use the 6 self tapping screws like I said before and it will work. Only problem, when you have it in the up (outta the way) position, you can see the screws and you may find them ugly! So get black ones if you can.
It hovers above the handbrake, but its no problem. I've gotten used to the gear changes and handbrake usage with it there, and I can tell you its very comfortable and the driving position reminds me of my brother's BMW 3 series (which I love).
