A few Photos...

Tim_GTi · Post by **Tim_GTi** » Thu Feb 28, 2008 10:23 pm

Sound system? If you havn't already got one

dino · Post by **dino** » Fri Feb 29, 2008 10:04 am

Votex rear spoiler and rear valance, 9n3 rear lights...

TimGti · Post by **TimGti** » Sat Mar 01, 2008 7:07 pm

dino wrote:Votex rear spoiler and rear valance, 9n3 rear lights...

Are the rear lights a stright swap or does the loom need changing for the new one?

K.I.T.T. · Post by **K.I.T.T.** » Sat Mar 01, 2008 7:22 pm

TimGti wrote:
dino wrote:Votex rear spoiler and rear valance, 9n3 rear lights...
Are the rear lights a stright swap or does the loom need changing for the new one?

Need to swap out some connectors on the plug, but looks pretty easy. Got a set on their way in the post

Give this a read: http://www.tigerstyle.co.uk/poloforum/v ... hp?t=32532

Ash

M7 · Post by M7 » Sat Mar 01, 2008 11:43 pm

i like that colour, its not a common one from what i've seen on the roads. yours and dave burton's look great on the tt comps

TimGti · Post by **TimGti** » Sun Mar 02, 2008 12:51 pm

K.I.T.T. wrote:
TimGti wrote:
dino wrote:Votex rear spoiler and rear valance, 9n3 rear lights...
Are the rear lights a stright swap or does the loom need changing for the new one?
Need to swap out some connectors on the plug, but looks pretty easy. Got a set on their way in the post

Give this a read: http://www.tigerstyle.co.uk/poloforum/v ... hp?t=32532

Ash

Cheers for that, might look into this a bit more..

samil87 · Post by **samil87** » Sun Mar 02, 2008 12:51 pm

looks sweet....love the colour!!!

TimGti · Post by **TimGti** » Sun Mar 02, 2008 2:39 pm

I get quite a lot of comments about the colour! Personally I love grey, so i was chuffed when I get my hands on this one!

Its actually called blue anthracite pearl... looks green/ blue/ grey depending on the sunlight!

Harnz · Post by **Harnz** » Sun Mar 02, 2008 6:45 pm

very very niceeeee

dino · Post by **dino** » Sun Mar 02, 2008 9:04 pm

My 9n3 lights had a plug and play loom.

TimGti · Post by **TimGti** » Sun Mar 02, 2008 9:10 pm

dino wrote:My 9n3 lights had a plug and play loom.

Sounds a bit more like it! Where did you get them from with the plug and play? Cant really be arsed with all the changing of wires!

K.I.T.T. · Post by **K.I.T.T.** » Sun Mar 02, 2008 9:15 pm

TimGti wrote:
dino wrote:My 9n3 lights had a plug and play loom.
Sounds a bit more like it! Where did you get them from with the plug and play? Cant really be arsed with all the changing of wires!

Ditto, would make life a tiny bit easier

Ash

dino · Post by **dino** » Sun Mar 02, 2008 9:23 pm

eBay. I think VW do the loom tho

TimGti · Post by **TimGti** » Mon Mar 03, 2008 1:39 pm

Popped into SEAT today and offered up a Leon Cupra R front splitter under the bumper of the polo to see if it fitted....

Looked ok along the front edge but the polo bumper has very square corners and the Leon much more round so it did'nt really fit round the corners.

Could'nt decide whether the heat gun would do the trick or not so I did'nt buy it! Thought id consider it some more!

K.I.T.T. · Post by **K.I.T.T.** » Tue Mar 04, 2008 1:33 pm

Mmmm had a go at fitting the 9n3 lights with no avail...bloody hard to get those wires out of the connectors!!

Ash