Throttle body

Bepe · Post by **Bepe** » Sun Mar 16, 2008 6:12 pm

Whats the Diameter of the throttle body inlet? going to order some silicone hosing, if no one nos then i'll have to take me airbox off which i cant be botherd to do
Thanks!

Tim_GTi · Post by **Tim_GTi** » Sun Mar 16, 2008 6:25 pm

63mm mate, i think

Bepe · Post by **Bepe** » Sun Mar 16, 2008 6:31 pm

that sounds about right Tim, as the throttle body on the 1.0 was 59mm i think, and tried swappin induction kit onto it and the silicone pipe was too small as the gti throttle body is bigger!

anyone no for deffinate? before i order some

jason11 · Post by **jason11** » Sun Mar 16, 2008 7:34 pm

any1 ??

Bepe · Post by **Bepe** » Sun Mar 16, 2008 7:36 pm

if weather is nice tommorow jason i'll just have to measure it lol

MaxZ · Post by **MaxZ** » Sun Mar 16, 2008 7:36 pm

Copied from Kam-Racing

This kit also contains a silicon bend (SASE9070) and the required breather filter (SA16-40) as well as nylon reducers from Diam. 70mm to Diam. 65mm and from Diam. 70mm to Diam. 60mm.

http://www.kam-racing.com/product_info. ... cts_id/404

Bepe · Post by **Bepe** » Sun Mar 16, 2008 7:39 pm

so Tim would be right it being 63mm then as the silicone would be slightly larger wouldnt it? oh and cheers max

jason11 · Post by **jason11** » Sun Mar 16, 2008 7:41 pm

nice one !!

top dolla maxz :lol: