Help Needed with Flush Fit Valves

MaxZ · Post by **MaxZ** » Thu Mar 20, 2008 8:52 pm

They're of this variety ..

The bottom flat ones, can be seen in this picture on the car..

The big question is .. How Do I Pump Them Up???

I've been trying to get my head around this and I still don't understand..

These are the tools I got from the previous owner..

Can Anybody please help!

polo_gti21 · Post by **polo_gti21** » Tue Mar 25, 2008 9:04 pm

from the looks of it mate the item 2nd on the left screws into the valve on the wheel and then attach the air pipe to that not sure but looks right from what i can see the other one 1st on the left looks like a different valve connector

MaxZ · Post by **MaxZ** » Tue Mar 25, 2008 10:08 pm

All sorted now thanks to people of Edition

sylvester · Post by **sylvester** » Tue Mar 25, 2008 11:35 pm

Can you let the forum know how inflate the tyres for future reference

MaxZ · Post by **MaxZ** » Wed Mar 26, 2008 10:28 am

The screws simply have to be undone with a screwdriver, then you screw on the metal adapter and use it as normal.

The same applies for the other type, except for you have to take out the tip with the adapter, rather than the screwdriver.

neilGTI · Post by **neilGTI** » Wed Mar 26, 2008 10:35 am

How long does it take to get the valve adaptor on and pumped up ?

I am possibly thinking of investing in some of these as i hate sticky out valves.

MaxZ · Post by **MaxZ** » Wed Mar 26, 2008 10:50 am

My guess would be about 20 seconds, I managed to get all the tyres pumped up in the time that the air machine gave me.

neilGTI · Post by **neilGTI** » Wed Mar 26, 2008 10:56 am

Cool, by the look of all the "tools" in your photo, i thought they would take a few minutes each.

I might have a look at getting some

Thanks MaxZ