Full Mk3 Golf Leather Interior - Will fit Mk4 Polo!!

ConradCL · Post by **ConradCL** » Mon Mar 17, 2008 9:26 pm

This interior is in very good condition. The back seats look like they have never been sat on and it has no sagging or marks on it. The front seats will fit straight in a Mk4 Polo, the rears need minor adjustments. The door cards will NOT fit in the Polo. Ill let the pics do the talking!

Tweeters included, other speakers can be included for extra if wanted.

Â£550 ovno.

Rob

Josh_polo · Post by **Josh_polo** » Tue Mar 18, 2008 7:40 pm

Shame about the colour, but my bro has a burple mk4 ill see if his interested

ConradCL · Post by **ConradCL** » Wed Mar 19, 2008 5:46 pm

No worries Josh, just let me know. Its almost perfect for the Purple Mk4's.

Rob

j-bonham · Post by **j-bonham** » Sun Mar 23, 2008 11:51 pm

Split front seats maybe ?? may take the lot off you depending on how much tingkering it'll take to get the rears in ??

cheers, john

brianpologti · Post by **brianpologti** » Tue Mar 25, 2008 3:53 pm

I had a set of these fitted in my polo gti ,the rears I foundit to be a lot easier to rob the backs off my old seat and swap over, only four screws for head rest part, the lower part of the rear seat just needed to cut and reshape the hinge part,

then job done, didnt take long the ones I got were out of a vr6 N reg, , oh and the fronts watch out for the hinge handle part, you have to change it and use the "ear" handles other wise you wont be able to get your seat seat due to the polo being narrower than a mk3 golf, now the seats I got are fitted in my mk2 golf that was hard work,

Tim_GTi · Post by **Tim_GTi** » Wed Mar 26, 2008 2:44 am

brianpologti wrote:I had a set of these fitted in my polo gti ,the rears I foundit to be a lot easier to rob the backs off my old seat and swap over, only four screws for head rest part, the lower part of the rear seat just needed to cut and reshape the hinge part, then job done, didnt take long the ones I got were out of a vr6 N reg, , oh and the fronts watch out for the hinge handle part, you have to change it and use the "ear" handles other wise you wont be able to get your seat seat due to the polo being narrower than a mk3 golf, now the seats I got are fitted in my mk2 golf that was hard work,

Ah so the rear bench DOES fit in the 6N2?

Du have any pictures at all of this mate? So your saying it's best to remove the metal back of back bench of the existing seats and fit them to the golf ones? And what exactly needs doing to the base of the bench?

Post by **alexperkins** » Wed Mar 26, 2008 11:19 am

Gotta cut the leather to do that

I spent hours trying to figure this out, and the only way to do it would have been cutting up the seat to reposition the hinge mount.

Tim_GTi · Post by **Tim_GTi** » Fri Mar 28, 2008 4:27 pm

alexperkins wrote:Gotta cut the leather to do that I spent hours trying to figure this out, and the only way to do it would have been cutting up the seat to reposition the hinge mount.

Yeh exactly thats what I though (cos you told me before lol).

Just re-read Brians post

"the rears I foundit to be a lot easier to rob the backs off my old SEAT and swap over, only four screws for head rest part"

I got excited and thought he used the mark3 Golf bench somehow!

brianpologti · Post by **brianpologti** » Sat Mar 29, 2008 8:37 am

the ones I had , just unclipped the back, undo the screw for headrests , do the same with cloth gti seats swap over and put screws back in and reclip in, so your just mounting the leather part to the your old mounting plate, the only problem I had was the bottom part of seat where its hinged to floor little bending the rod part and job done , the leathers I had were out of a mk3 vr6 nreg, ask the seller if the ones his got have a black plastic trim/clip around the rear seat backing

Tim_GTi · Post by **Tim_GTi** » Sat Mar 29, 2008 11:18 am

Have you got any pics Brian?

Does anyone know if the mark3 Golf has more than one sized interior?

ConradCL · Post by **ConradCL** » Sat Mar 29, 2008 3:16 pm

Tim_GTi wrote:Have you got any pics Brian?

Does anyone know if the mark3 Golf has more than one sized interior?

Im not sure but these are out of a K-reg so would have thought they would be the same as the before mentioned N-reg as they are both early.

j-bonham wrote:Split front seats maybe ?? may take the lot off you depending on how much tingkering it'll take to get the rears in ??

cheers, john

Dont really want to split John as the interior is so unique but I know a mate of mine fitted a Golf Mk3 Colour Concept interior in to his 6N without too many troubles if that helps.

Make me an offer? Shame to have these sitting around.

Rob

ConradCL · Post by **ConradCL** » Wed Apr 02, 2008 8:04 pm

Â£500?

Rob

ConradCL · Post by **ConradCL** » Mon Apr 07, 2008 10:10 pm

Right, first sensible offer will take it. Really got to get rid before this lovely interior gets damaged or marked.

Rob

ConradCL · Post by **ConradCL** » Sun May 18, 2008 4:13 pm

Â£400 and its yours.

Rob