complete ko4 turbo conversion, inc downpipe

ceedubya · Post by **ceedubya** » Thu Apr 17, 2008 12:52 am

complete ko4 turbo set up for sale to fit a 9n 1.8t or new gti

includes, turbo (37k), manifold, injectors, custom downpipe (Â£300s worth) and any other minor bits i wont be using

Â£500

can also supply, super chipped bam ecu (280bhp), clocks and key (to run above turbo on a 1.8t)

tomo87 · Post by **tomo87** » Thu Apr 17, 2008 11:26 pm

anyway you could get this lot couriered to me? cash waiting!

shouldnt be too hard for this to fit onto a 1.8T ibiza lump thats going in my mk5 polo should it? i know i will need a custom manifold...anything else?

ceedubya · Post by **ceedubya** » Fri Apr 18, 2008 12:21 pm

can get it delivered no probs

you may need 1 oil custom feed pipe (Â£20-30)

the manifold is included with the down pipe

are you wanting the chipped ecu too???

ceedubya · Post by **ceedubya** » Mon May 05, 2008 12:27 am

have just taken turbo off this aft so its all ready to go

will also include a full size front mount intercooler at the above price

ceedubya · Post by **ceedubya** » Thu May 08, 2008 12:15 am

pics =

this is the flexi part on the car

complete downpipe

manifold,turbo, 1st section of downpipe

nearly forgot intercooler =

ceedubya · Post by **ceedubya** » Thu May 15, 2008 1:47 pm

can also supply, super chipped bam ecu (280bhp), clocks and key (to run above turbo on a 1.8t)

^this bit is sold^

still have the ko4 conversion for sale

ceedubya · Post by **ceedubya** » Tue May 20, 2008 1:41 am

suprised none of the polo gti peeps aint bought this set up, your warranty will be up soon

panda · Post by **panda** » Tue May 20, 2008 2:55 pm

Chris, isn't this the turbo you fixed with a cable tie?

panda · Post by **panda** » Tue May 20, 2008 2:58 pm

lol i'm kidding btw peeps

This is the AAS downpipe isn't it? The welds are spot on, as with everything AAS do!

ceedubya · Post by **ceedubya** » Wed May 21, 2008 3:54 pm

panda wrote:lol i'm kidding btw peeps

This is the AAS downpipe isn't it? The welds are spot on, as with everything AAS do!

ya need this for yours panda when you get round to fitting a 1.8t, nearly everything is there to make a average 1.8t into a quick one

i am picking the polo up today with the new downpipe

i ll take some pics before i heat wrap it to show how good they are made

ceedubya · Post by **ceedubya** » Thu May 22, 2008 2:29 am

panda wrote:Chris, isn't this the turbo you fixed with a cable tie?

shall i tell everyone your real name

ceedubya · Post by **ceedubya** » Sat May 24, 2008 1:07 am

maybe splitting set up

let me know if you need anything

ceedubya · Post by **ceedubya** » Sun Jun 01, 2008 11:15 pm

only have downpipe left, Â£130 delivered