Gearbox Query

Chat about your MKV (6N2) Polo GTi
Post Reply
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Gearbox Query

Post by Torq-Al »

I have been looking at a GTI & know that the gearbox is a major weakpoint. Is there anything you can do when a box is refurb'd to stop it self-destructing in the future? And could you retrofit a 6-speed box into the polo?
Luke'sGti
Silver Member
Posts: 354
Joined: Mon Apr 24, 2006 12:33 pm
Location: Lancashire

Post by Luke'sGti »

Welcome to the forum. If you use the "search" function this topic has been covered lots in the past. To cut a long story short, basically without spending lots and lots of money you cannot fit a 6 speed box into the car (even the lupo, as it has a different linkage - i think). As far as maintaining it goes - just make sure the gearbox oil is changed regularly, and try not to drive it hard when its cold - that the best advice I could give. Hope that helps.
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Post by Torq-Al »

So gearbox oil changes would be advisable every year or two then? What about fitting an gearbox oil cooler, would that help?
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

I'm planning on changing my box oil every year. Maybe a bit excessive but I think it's necessary!!

Never heard of a gearbox oil cooler? That may help alot actually, the box can get very notchy on a hot engine.
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Post by Torq-Al »

Tim_GTi wrote: Never heard of a gearbox oil cooler? That may help alot actually, the box can get very notchy on a hot engine.
You get a gearbox oil cooler on a lot of 4x4 automatics, i think on a manual 'box you may have to put a small electric oil pump in the system. Easy to do tho'. Plus if it helps eliminate part of the problem then well worth it!

Have a look at:
OIL PUMP
http://www.demon-tweeks.co.uk/products/ ... e=MOCWCP1B
OIL COOLER
http://www.demon-tweeks.co.uk/products/ ... e=EPP20706

Don't think it would be too difficult to fit, especially if you had 'box out, if you want braided fittings speak to http://www.h-e-l.co.uk/ as they were great when I had braided lines on off-road racers, even tho' they mainly do bikes they do bespoke stuff to
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Sounds very interesting, I'll have to speak to my local garage next time I'm down there to see what their view are on it, sadly I don't have the cash or knowledge to find out first hand though
User avatar
Torq-Al
Gold Member
Posts: 764
Joined: Thu Apr 24, 2008 10:52 pm
Location: Torquay, South Devon

Post by Torq-Al »

From what I remember it is very much a motor-racing idea, so anyone with motorsport background would possibly best advisor!
tegwin
Gold Member
Posts: 945
Joined: Mon Nov 13, 2006 5:14 pm
Location: Malvern, Worcestershire

Post by tegwin »

IMHO, A gearbox cooler might help a bit, but its not going to solve the GTI box issues im afraid!......
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

tegwin wrote:IMHO, A gearbox cooler might help a bit, but its not going to solve the GTI box issues im afraid!......
oh yeh of course it won't, but if it helps get rid of the notchyness it has I get it
Mouse_GTI
Bling Bling Diamond Member
Posts: 2937
Joined: Sat Apr 01, 2006 10:29 am
Location: Aberdeenshire, Scotland
Contact:

Post by Mouse_GTI »

tegwin wrote:IMHO, A gearbox cooler might help a bit, but its not going to solve the GTI box issues im afraid!......
Yup, if a component isn't designed to take the amount of stress it is given then it is gonna go!
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Post by Tim_GTi »

Does anyone know how much it would cost roughly to get this installed?
Post Reply