PCDs (now turned into a discussion about rare bbs rims!)

KarlM · Post by **KarlM** » Wed Mar 03, 2004 12:36 pm

can someone just confirm what PCD the 6n is?

am i right in thinking that its ET35 offset? so some alloys that are

SIZE-6 X 13 ET 13 4X100 STUD PCM.

will stick out quite far?

please replay asap!

david burton · Post by **david burton** » Wed Mar 03, 2004 12:39 pm

yes - they will stick out further, but they're only 6 inches wide so that's not so bad. Be careful tho! What width wheels are you running now?

KarlM · Post by **KarlM** » Wed Mar 03, 2004 12:47 pm

7" ET36

amstrange1 · Post by **amstrange1** » Wed Mar 03, 2004 1:43 pm

They'll stick out a fair bit - there's a set of ET13 wheels for sale on Porka at the moment, 13"x6" too. They were fitted to a Mk2 saloon and apparently didn't scrub.

KarlM · Post by **KarlM** » Wed Mar 03, 2004 1:48 pm

cool,

so if anyone wants to buy some gold 'Mahle' alloys then make me an offer

david burton · Post by **david burton** » Wed Mar 03, 2004 1:50 pm

So, you're an inch wider at the mo (so the 6's would stick out a half inch less), but the offset is 22mm further out - so these new ones should stick out about 10mm more.

what do the alloys look like (the ones you're sellin)?

are these em:

KarlM · Post by **KarlM** » Wed Mar 03, 2004 1:54 pm

Speedlaw · Post by **Speedlaw** » Wed Mar 03, 2004 3:41 pm

Could be very, very sweet.

KarlM · Post by **KarlM** » Wed Mar 03, 2004 3:48 pm

wheel i've ordered some new 17s but was thinking about keeping these for the VW shows.

You would not believe how much i paid for them

amstrange1 · Post by **amstrange1** » Wed Mar 03, 2004 4:03 pm

I think the wheels for sale on Porka (okay they're my brothers!) may well be the same. I've been trying to find out what they are for ages, but having seen that pic I've done some more research and it seems like the wheels were fitted to E21 series BMWs. What do yours have stamped on them Karl?

KarlM · Post by **KarlM** » Wed Mar 03, 2004 4:07 pm

not received them yet. There BBS 'Mahle's

I think they came standard on the E30 M3

david burton · Post by **david burton** » Wed Mar 03, 2004 5:53 pm

how much d'you pay?

KarlM · Post by **KarlM** » Thu Mar 04, 2004 8:50 am

If i told you you'd hate me.

it was less than Â£100 notes (including shipping)

amstrange1 · Post by **amstrange1** » Thu Mar 04, 2004 12:25 pm

@Karl - when you get them can you let me know what's stamped on them please? Would like to know for definate what the wheels my bro has are.

KarlM · Post by **KarlM** » Thu Mar 04, 2004 4:23 pm

where abouts am i looking? I'll ask the seller. centre cap or rim?