fitting in new headlights...

Petar001 · Post by **Petar001** » Thu Jun 05, 2008 8:18 pm

this are headlight that Dont come with harness ! !

and yes these 3 sets are for leds for rings !
and
you need to connect this to first light, not short light but on... (dont know the word)

yosin · Post by **yosin** » Thu Jun 05, 2008 10:35 pm

does anyone know where to stick the earths and live wires for these angel lights/??

Shmosh · Post by **Shmosh** » Fri Jun 06, 2008 1:13 am

^^ If you go onto club polo, there's a thread in the ice guide section on installing angel eyes into a 6n. scroll down to the penultimate post.

http://www.clubpolo.co.uk/forum/index.p ... pic=110114

i'm gonna do this next week when mine arrive! good luck.

Petar001 · Post by **Petar001** » Fri Jun 06, 2008 9:34 am

UH OK

On your connector from car for headlights !

you have in upper row 3 wires : brown: red/blue: yellow/black:
This is for leveling your lights !

and next row you have 4 wires

brown: white/black: yellow/black: grey/black: THIS is for
minus: long light : short light : side light

So RED wires connect to grey/black
and BLACK wires connect to brown !

That is it !

yosin · Post by **yosin** » Fri Jun 06, 2008 12:26 pm

o i c...

so to connect these wires would i just shave bit off the wire from quite high up behind the car loom and just use some electric tape to stick the live wires from the angels on the wiring ?

and same goes for the earth

Petar001 · Post by **Petar001** » Fri Jun 06, 2008 12:49 pm

yes

yosin · Post by **yosin** » Fri Jun 06, 2008 12:51 pm

thanks dude gona do it now

yosin · Post by **yosin** » Fri Jun 06, 2008 2:35 pm

the lights levelling wont work right?

because on the angel lights there isnt 3 wires on the upper row?

or is that just my 1 >.<

JoeG07 · Post by **JoeG07** » Sat Jun 07, 2008 2:16 am

mate you can undo those screws with just a normal ratchet screwdriver its a bit fiddly just get the right end for your screwdriver, have a look at the screw with a torch so you know where it is then just poke around till u get it

yosin · Post by **yosin** » Sat Jun 07, 2008 3:07 am

what screws do you mean? im confused

randomage · Post by **randomage** » Sat Jun 07, 2008 11:46 am

he means the ones that hold the headlights in

yosin · Post by **yosin** » Sat Jun 07, 2008 12:17 pm

o you was talking about them joeg07...sorry mate...ye i fiddled around it but when i was squeezin the screwdriver in i thought i might crack the hole where the bumper is =.=

Shmosh · Post by **Shmosh** » Tue Jun 10, 2008 3:06 pm

how did it go? my angel eyes arrived today and i'm gonna give it a go in a few days.

yosin · Post by **yosin** » Tue Jun 10, 2008 4:14 pm

hi mate...ye i have my angels on now and they are fine now apart from the fact that they dont fit in exactly as direct replacements of the lights..